Inner Range 4000 Operation & User’s Manual

......................................................................................... PHONE:................................... FAX: ........... ...

installed & maintained by FACTORY CERTIFIED TECHNICIANS. For a list of Accredited Dealers in your area refer to the Inner Range Website. http://www.innerrange.com CONCEPT 4000 CONCEPT 4000 CONCEPT 4000 CONCEPT 40 ...

MENU FLOWCHART ........................................Inside Rear Cover. SYSTEM OVERVIEW ....................................................................... 4 THE LCD TERMINAL ..... ...

USER PROGRAMMING & FLOWCHART ...... MENU, 2, 1 ............ 46/47 USER RF REMOTE FOB PROGRAMMING ... MENU, 2, 1 ............ 59 DELETING A USER................................... ...

Management and Building Automation Systems. Both systems offer the system designer the ability to provide Security monitoring, Access Control and Automation as either ...

have a PIN Code and/or a Card &/or a Wireless Remote in order to perform any operations. A User is also given a name of up to 16 characters for easy identification and a “User Type” ...

Many system operations, such as turning Areas ON and OFF, are usually performed at a Terminal. A system may have up to 99 Terminals connected. Any of these Terminals can be used to operate the system, however, the system may be progr ...

Turnstile, Boom gate, etc.) is called a “Door”. Installer programming options can provide for different types of Doors to be controlled and monitored in different ways. The way in ...

Default LCD Display. The LCD Terminal offers a number of options for the Default display. This is the display that will be shown when there are no User operations being performed, and no Alarms or other messages to be displayed. The Default display can be se ...