Honeywell Dolphin 9700 Quick Start Manual

File Specifications

Brand: Honeywell
Category: Handhelds
Model: Dolphin 9700 (Quick Start Manual), pr1v2096o7G9s
File Type: PDF
File Size: —
Pages: 20 pages

Download PDF

Download Honeywell Dolphin 9700 Manual (20 pages)

Read Online:

Read the Honeywell Dolphin 9700 Quick Start Manual online using the built-in PDF viewer.

Key Pages of Document

Honeywell International Inc. (“HII”) reserves the right to

make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a commitment on the p ...

Out of the Box

Verify that the carton contains the following items: • Dolphin 9700 mobile computer (the terminal) • Main battery pack (7.4V Li-ion) • Quick Start Guide Note: If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal sh ...

SIM Card Socket

Rear Speaker Flashlight/ Camera Flash Color Camera Image/Scan Engine Window Memory Card Socket Battery Well ...

Install the Main Battery Pack

The 9700 is shipped with the battery packaged separate from the unit. Follow the steps below to install the main battery. 1. Release the hand strap near the base of the terminal. 2. Remove the battery door by releasing the door latch and pulling up with a hinging motion. 3. Insert the battery into the battery well. 4. Replace ...

Charging the Dolphin

The initial charging time for the main battery pack is 6 hours, and 8 hours for the internal backup battery. Connect the terminal to one of the 9700 series charging peripherals to charge the main battery. HomeBase AUX Battery Well AUX Battery LED Dock LED COMM LED ...

HomeBase Back Panel

HomeBase LED Indicators Green The terminal is properly seated in the base. Orange The auxiliary battery is charging. Green The auxiliary battery has completed charging and is ready for use. Serial Port Communication Red Serial data is being sent from the host device to the base. Green Serial data is being sent from the base to the host ...

The light emitting diode (LED) located at the top of the

LCD display flashes and illuminates during resets, scanning/imaging and taking a picture. This LED can be programmed by various software applications. USB Connector RS232 Connector Host Device Power Adapter Cable Or Power Cord COMM Cable ...

Battery Status Indicator

The Dolphin’s battery status is indicated at the top of the touch screen in the Navigation Bar. ActiveSync Communication To synchronize the host workstation and the Dolphin terminal, ActiveSync 4.5 or higher must be installed and configured for the appropriate communication type on both devices. Dolphin terminals ship with Active ...

⚠️ Download Safety

The Handhelds Quick start manual (20 pages) is completely safe to download (last scan date: 27/06/2026).

Related PDF Instructions for Honeywell Dolphin 9700: