InnoMedia MTA6328-2Re Installation Instructions Manual

If you purchased the MTA6328-2Re device directly from deltathree – You will need to complete the configuration by applying specific user settings via the device’s LAN interface. Connect your MTA6328-2Re as a Router and VoIP adapter 1. Connect the WAN port on the Gateway’s rear panel to the Ethernet socket on yo ...

with RJ-11 Phone cables (if you configure only one user account, connect the phone to the Phone1 port). 6. Verify that all system components are properly installed. Make sure that all cable connectors are securely positioned in the appropriate ports. 7. Connect the power adapter t ...

If your ISP provides your IP address using PPPoE, then you will need to configure your MTA 6328-Re so that it will be able to establish a PPPoE connection. To configure PPPoE settings, follow these steps: • Open your web browser and connect to your MTA. • Click on IP Network, then PPPoE Settings. • Click Enable PPPoE to enabl ...

Figure 2 • Enter the following information: o For dial-tone:  SIP PROXY
sipauth.deltathree.com  SIP Local Signaling Port
5060.  SIP Domain
deltathree.com.  Registration Expiration Time
300. o For IVR:  SIP PROXY
natrelay-devices.deltathree.com  ...

• Click on the Save button. • Go to VOIP
User Account. Follow instructions as shown in the figure bellow. • Enter the following information: o For account with DID:  Line No.
Choose 1 or 2 (device supports 2 lines).  User ID
DID.  User Password
PIN.  Confirm Password
PIN.  User Name
your name.  Au ...