ICRealtime ELIP-470 Quick Installation Manual
Text of the manual
By selecting this product, you have decided to use a professional device that guarantees highest
quality and reliability. We would like to thank you very much for your confidence and kindly ask you to
read the following instructions carefully before installation and operation in order to take full advantage
of all quality features regarding
Please read the manual carefully before the installation in order to set up the camera correctly and
to obtain the best picture quality.
Please keep the manual in good condition for your future reference and service application.
Installation and services should only be carried out by an authorized personnel according to local
safety
1. PRODUCT OVERVIEW
Key Features
2.0 Mega pixel 1/2.8" SONY progressive scan CMOS image sensor for excellent image quality
Vandal Proof, fire resistant and tamper resistant
Perfect tool-free 3-Axis mechanism inside
Extended IR life cycle
Dust and Moisture free (IP66 Waterproof), IK10 Certified
Dual Streaming of H.264 and M-JPEG
Effect - Color, Sharpness, Mirror / V-Flip, etc.
Output
BNC x1, 1.0Vp-p, 75 ohm Composite Video, NTSC / PAL
Audio
Audio Streaming
Two-way, full duplex
Audio
Compression
G.711
Sample Rate
8KHZ
Data Rate
64Kbps
Audio Input
Microphone input / 1 x Line-In (Mono)
Audio output
Line output / 1 x Line-Out (Mono)
Network
Security
Password
2. NAME AND FUNCTION OF EACH PART
2.1 Package Contents
APPEARANCE
DESCRIPTION
IP Camera x 1
Installation Guide x 1
Drilling Template x 1
Torx L-Wrench x 1
Tapping Screws x 4
Plastic Anchor x 4
LED Cap x 1
CD x 1
2.2 Name and Function
2
3
4
1
- RED LED : Power On
- GREEN LED : Network connection and
Video transmission
- GREEN LED Blinking : Motion Detection
Lens
3 ~ 10.5mm Vari-focal Megapixel Lens
Illumination sensor
Control IR LED by sensing light
IR LED
Infrared Hi-power LED
3. INSTALLATION
3.1 Installation overview
- Surface Mount
Ceiling Til
① Paste a Drilling Template on the ceiling or wall and drill screw points which will be dome for
installation.
② Fix the Surface Mounting Base by using Tapping Screws provided.
③ Fix the Flush mount Base on Surface Mounting Base.
④ Turn the camera Ass’y to the desired direction.
⑤ Turn the dome and shied cover to the camera direction.
⑥ Fix t