IgniteNet Spark AC750 Quick Start Manual

Cloud-­Enabled  Enterprise  Access  Point Spark™  AC750  and  Spark™  N300 The  Spark  AC750  and  Spark  N300  are  dual-­  and  single-­band  enterprise access   points  (APs).  The  units  are  designed  to  be  operated  either  placed  on a  desk  or   mounted  on  a  wall  or  ceiling.  The  package  includes  a  mounting plate  for  attaching   the  AP  to  a  wall  or  ceiling  T-­bar.  The  APs  can  be  powered either  by  the  universal   power  supply  included  in  the  package,  through  an Ethernet  cable  connection  from   a  Pow ...

– Follow  the  steps  in  this  guide  to  install  the  AP  in  your  network. Caution:  The  planning  and  installation  of  the  AP  requires  professional personnel   that  are  trained  in  the  installation  of  radio  transmitting  equipment. The  user  is   responsible  for  compliance  with  local  regulations  concerning items  such  as   antenna  power  for  instance.  Therefore,  it  is  recommended  to consult  a  professional   contractor  knowledgeable  in  local  radio  regulations prior  to  equipment     installation. 1.  Unpack  the  AP ...

– Mounting  the  AP  on  a  wall Mount  the  unit  on  a  wall  using  the  mounting  plate,  screws,  and  wall  plugs provided   in  the  mounting  kit. Wall  Mounting At  the  installation  location,  hold  the  mounting plate  against  the  wall  with  its  release  tab pointing  down. Mark   the   four   holes   for   the   wall   plugs   and screws.   Drill  four  holes  for  the  wall  plugs,  and then   insert   the  plugs  and  tap  them  flush  with the  wall  surface. Align  the  mounting  plate  with  the  four  holes, and   then  use  th ...

– Mounting  the  AP  on  the  ceiling If  the  room  is  equipped  with  a  suspended  ceiling,  use  the  mounting  plate provided   in  the  package  to  attach  the  AP  to  the  metal  ceiling  T-­bars. The  mounting  plate  supports  two  different  sizes  of  suspended  ceiling  T-­bars. The   position  illustrated  below  is  for  15  mm  bars.  Use  the  position  at  a  90 degrees  angle  for  24.5  mm  bars. Suspended  Ceiling  Mounting Press  the  retention  clips  of  the  mounting plate  against  the  ceiling  T-­bar. Rotate  the  plat ...

– 3.  Connect  Cables      Connect  Ethernet  cable  to  the  1000BASE-­T  (WAN/PoE)  port  on  the  unit. Connect  Category  5e  or  better  cable  to  the WAN/PoE  RJ-­45  port. Connect  the  other  end  of  this  cable  to  a PoE  injector  or  LAN  PoE  switch (depending  on  AP  model). (Optional)  Connect  local  LAN  devices to   any  of  the  other  RJ-­45  ports  on  the AP  using  Category  5  or  better  cable. These  100BASE-­TX  ports  are  labeled  LAN1 and  LAN2. 4.  Connect  Power      The  AP  can  be  powered  either  by  the ...

– 5.  Verify  AP  Operation      Verify  basic  AP  operation  by  checking  the  system  LEDs. The  WAN/PoE  port  link/activity LED  should  be  on/blinking  green. When  connected,  the  LAN1 and  LAN2  port  link/activity LEDs  should  also  be on/blinking  green. The  system/wireless  LED  should be  on  red  when  the  AP  is powered  on,   or  on/blinking  green (2.4  GHz)  or   blue  (5  GHz). 6.  Connect  to  the Web User Interface When   managed   in   a   stand-­alone   mode,   the   AP   offers   a   web-­based management   interface   for   th ...

– 7.  Complete  the Setup Wizard The  first  time  you  log  in  to  the  web  interface,  the  Setup  Wizard  is  displayed. Select  the  country  of  operation  for  the  AP.  Setting  the  correct  country  ensures that   the  radios  operate  within  local  regulations  specified  for  Wi-­Fi  networks. Manage  the  AP  with  the  IgniteNet  Cloud  Controller Go  to  cloud.ignitenet.com  to  register  your  AP. Log  in  and  select  Devices  from  the  menu.  Click  Add  Device  and  enter  the AP  serial   number  and  MAC  address  to  register ...

121  x  121   x  30.5  mm  (4.76  x  4.76  x  1.2  inches) Weight 196  g  (0.43  lb) Temperature Operating:  0  °C  to  40  °C  (32  °F  to  104  °F) Storage:  -­40  °C  to  70  °C  (-­40  °F  to  158  °F) Humidity Operating:  10%  to  90%  (non-­condensing) Network  Interfaces Ports WAN/PoE  RJ-­45  Port:  1000BASE-­T,  passive  PoE LAN1  RJ-­45  Port:  100BASE-­TX LAN2  RJ-­45  Port:  100BASE-­TX 2.4  GHz  Radio IEEE  802.11b/g/n 5  GHz  Radio IEEE  802.11a/n/ac Radio  Frequencies 2412  ~  2472 ...