Harley-Davidson 77028-10 Instructions

Text of the manual

BOOM! AUDIO SPEAKER KITS

GENERAL Kit Numbers 77028-10, 77037-10, 77181-10, 76000074 Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only). Table 1. Speaker Kits Application Kit Front Speaker Kit, Road Glide models 77028-10 Rear Speaker Kit, all

For vehicles equipped with security siren:

• Verify that the Hands-Free Fob is present. • Turn the ignition key switch to IGNITION. To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before pro- ceeding. (00251b) 1. Refer to the service manual and follow the instructions to remove the main

Position a new speaker (5) against the rear face of the

adapter (1) as shown, with the spade terminals pointed inboard and down. Align the mounting holes in the speaker and adapter. Use the Phillips-head screws (6) removed earlier to fasten the speaker to the adapter. Tighten the screws to 6-12 in-lbs (0.7-1.4 Nm). 4. Position the speaker grille against t

RETURN TO SERVICE

NOTES Before installing the outer fairing, check that speakers are operating correctly, understanding that full sound quality and fidelity will not be achieved until the outer fairing is completely installed. Verify that the ignition key switch is in the OFF position before installing the main fuse. 1. Refer to the service manual and follow

Other Speakers Manuals