GRAUPNER MZ-10 HOTT Operating Instructions Manual

Keep this manual in a convenient place for quick and easy reference. No. S1001 ...

BEFORE USE OPENHOBBY A/S CENTER 1. BOX CONTENTS Thank you for purchasing mz-10 HoTT 2.4GHz Radio System. This system is extremely versatile and may be used by beginners and pros alike. In order for you to make the best use of your system and to fly safely, please read this manual carefully. If you have any difficulties while using your sy ...

3. FEATURES All instructions, warranties and other collateral documents are subject to change at the sole discretion of Graupner/SJ. For up-to-date product literature, visit http://www.openhobby.com and click on the support tab for this product. This is a sophisticated hobby product and NOT a toy. It must be operated with caution and ...

Battery Cover Data Pin Charge Socket RF Trainer Switch Direction Button Aileron Trim Throttle Trim Throttle and Aileron Stick Neck Strap Lug Dual Rate Switch Channel Reverse LED Wing Mix LED Bind LED 5 Channel Switch Rudder and Elevator Stick Elevator Trim Rudder Trim Power Switch Mode Button TX Handel Antenna ...

7. ADJUSTBLE STICK TENSION The control stick is consisted of 2pc of stick levers and it allows you to adjust the control stick’s length as you want. 1. Hold the lever“B”and turn the lever“A” counter clockwise The lock will be released. 2. Turn the lever“B”and adjust the control stick’s length as you want. Turn the l ...

page in the transmitter programming setup section according to the manual. 5 9 7 6 10 8 Make sure to test all functions are normally operated in mode 2 before flying NOTICE Unscrew the tension spring control bolt in the elevator gimbal of mode 1 transmitter Assemb ...

According to the below picture with guideline, after disabling the other side stick, you can pick the throttle channel of mode 1 or 2. The method of Disabling Tension The both sticks could be used tension or throttle types according to the users. At first, you can open the case of Trans ...

OPERATION HoTT stands for Hopping Sequence Telemetric Technology, it is Graupner/SJ’s unique telemetry technology in 2.4GHz signal protocol that supports Bi directional data transmission gives user real-time information on things like user model’s RPM, Voltage, Temperature, User programmed warning, and etc. The use of up to 75 channels e ...

the receiver the specific code of the transmitter so that it will only connect to it’s corresponding transmitter. 1. Switch on the transmitter and receiver. 2. Press & hold the SET button on the receiver for over 3 sec until the receiver enters BIND mode. 3. P ...

the function of the elevator to allow precise control of both roll and pitch for delta wing aircraft. 7. Delta Wing 1. Press & hold the DIRECTION button for over 2 sec and then release the button, the transmit- ter enters Reverse mode. 2. Press the DIRECTION button ...