Aquatica Digital AD7000 Operating Manual

The AQUATICA AD7000 Digital Housing is the result of a long and continuing relationship with the most demanding underwater pho- tographers in the world. Each housing is machined from solid aluminum on the best 5 axis computerized machine for the ...

2- Sub-Command Dial knob 3- Main Command Dial knob 4- Power Switch/Illuminator lever 5- Bulkhead strobe connector (Nikonos type shown) 6- Bulkhead strobe connector (Optical type shown) 7- Release mode dial selector knob 8- Hydrophone 9- Exposure mode selector 10- Focus/Zoom pinion gear release disk 11- Focus/Zoom Control knob 12- Foc ...

1. SHUTTER RELEASE LEVER: Pulling the shutter release lever back part way activates the camera meter and auto focus. Pulling the lever back all the way fires the camera. 2. SUB-COMMAND INPUT / APERTURE KNOB: Rotates clockwise and counterclockwise. Use alone or in combination with other controls to select or set various camera functions or ...

28. REMOVABLE VIEWFINDER: A full view of the illuminated camera viewfinder displays all necessary information. This viewfinder can be removed and replaced with the optional Aqua View Finder (# 20054) for a larger displayed image. 29. REAR LCD WINDOW: allow viewing of menus, information and images. 30. MOISTURE ALARM WARNING DIOD ...

cally designed to place all the essential camera controls under your finger tips and features the following: A. A port locking mechanism to prevent accidental rotation of the port or extension mounted on the housing B. ...

1. Select the correct port: Once you have decided on your type of photography for the dive, you will be installing either a flat Macro Port (product # 18426 or 18428), or a Dome Port (Product # 18405, 18407, 18409 or 18410). Refer to the AD7000 lens chart for the suggested port and accessories for the lens used. Macro Port Extension ...

1. Important Note: prior to installing the camera in the housing, remove the rubber eye piece and the rear LCD plastic protector from the camera as well as the camera strap, Clips and/or any object that might obstruct installation, third party camera strap hookup should be removed or tucked away 2. Make sure the ON / OFF / ...

rotating the disc (key # 10) under the focus/zoom knob into the up position, install the lens prepared with its gears (if needed) through the port opening in the front of the housing. If using a gear always confirms that it is properly installed and ...

Threaded holes are provided on top of the hand grips to accept the necessary shoes or bracket to accommodate your strobes arms. Additionally, three 1/4”-20 threaded holes on the bottom of the housing can also be used for various mounting applications and a 1/4”-20 threaded hole on top of the rear half of the housing will ac ...