GSS PSDP 6200 Assembly Instructions Manual

Beuthener Straße 43 D-90471 Nuremberg Phone: +49 (0) 911 / 703 8877 Fax: +49 (0) 911 / 703 9210 E-mail: [email protected] Internet: http://www.gss.de Assembly Instructions Assembly Instructions English Grundig SAT SystEms A CLASS CLASS KLASSE KLASSE PSDP 6200 Satellite Digital PAL ...

- 2 - Contents 1 Safety regulations and notes .....................................................................................4 2 General information ..................................................................................................5 2.1 Packing contents .............................................................................. ...

- 3 - Setting audio output ........................................................................28 Adjusting the picture format ..............................................................28 Switching teletext mode off/on ..........................................................28 Activating test lines ............................................ ...

- 4 - 1 Safety regulations and notes • Assembly, installation and servicing should be carried out by authorised electricians. • Switch off the operating voltage of the system before beginning with as- sembly or service work or pull out the mains plug. • Do not perform installation and service work during thunderstorms. • Install the system so ...

- 5 - 2 General information 2.1 Packing contents 1 cassette PSDP 6200 2 HF cables 1 CD (assembly instructions) 1 Brief assembly instructions 1 Measuring log 2.2 Meaning of the symbols used Important note —> General note • Performing works 2.3 Technical specifications The devices meet the following EU directives: 2006/95/EC, 2004/108/EC The produ ...

- 6 - Connections SAT inputs: 2 F sockets HF output: 1 IEC socket Connection strip (10-pin): for supply voltages and control circuits RS 232 socket: serial interface for software update Conditional access: 1 (2 channels can be decoded) 2.4 Description The twin transmodulator cassette is a QPSK-converter, which converts all sta- tions modulated accordin ...

- 7 - 2.5 Software query Control unit If necessary, you can activate the indication of the software version of the con- trol unit manually: • Press any two keys on the control unit of the head-end station simultaneously until the display goes dark and afterwards the software version, e.g. “V 40” and the system clock frequency (e.g. “16 MHz“)a ...

- 8 - 3.2 EMC regulations To comply with the current EMC regulations, it is necessary to connect the lines leading in and out of the head-end station using cable terminals. When mounting the cassette in a head-end station which is installed in a 19" cabinet, make sure the connections leading in and out for the 19" cabi- net are made using cable termi ...

- 9 - 3.3 Overview of the cassette 1 SAT IF input (channel strip “B”) 2 Status LED of the channel strip “B” 3 SAT IF input (channel strip “A”) 4 Status LED of the channel strip “A” 5 D-SUB socket “RS 232“ 6 Slot for a CA module 3.4 Connecting the cassette • Connect the SAT IF input 3 (channel strip “A”) and SAT IF input 1 (cha ...

- 10 - 3.6 Retrofitting a CA module The cassette is equipped with a common interface. It allows you to connect a CA module for various encryption systems and service providers. Encoded channels can only be decoded with a CA module suitable for the encoding system and the corresponding smart card. The smart card contains all the infor- mation for autho ...