Heatmiser PRT-EAU1 Manual 

2 Electric Floor Heating Thermostat 2 Model: PRT-EAU Table of Contents 1 2 3-4 5 Product image Table of contents Installation procedure Mode select Model: PRT-EAU 1 25-26 27 28 28 - 29 29 30 LCD display Setting the switching time Timer control Optional features Factory reset Time clock mode wiring diagram Mode 2 - Time Clock El ...

Model: PRT-EAU Mode Select This device can either be used as a thermostat or a time clock. Thermostat mode is the default setting. Follow the steps below to change between thermostat or time clock modes. • Use the left and right arrows to scroll to SETUP ...................................................... • Press ...

Model: PRT-EAU This thermostat can be configured for different sensor options such as built in air sensor, floor sensor or both. On the display it will clearly show which sensor is being displayed by showing either “Room Temp” or “Floor Temp” before the actual temperature. Note: Built in Air Sensor only MUST NO ...

Model: PRT-EAU Heating On/Off Frost Protect Mode: Use the left/right keys to scroll to the power button ................................................. The frost icon will toggle on/off each time tick is pressed ............................................................ In this mode, the thermostat will display the ...

Model: PRT-EAU Re-calibrating the Thermostat If you need to re-calibrate the thermostat follow these instructions. • Using the left/right keys scroll to SETUP and press tick .................................. • Press and hold the tick and down keys together for 10 seconds ................... • The display will no ...

Model: PRT-EAU Wiring Diagram - Time Clock Mode RT1 - RT2 N N L LOAD RCD MAINS SUPPLY 230V AC 16 Amp Max L N LOAD Optional Settings - Feature Table 01 FEATURE Program Mode DESCRIPTION 01 = Weekday/Weekend Programming 02 = 7 Day Programming 03 = 24 Hour Mode SETTING Factory Reset The thermostat has a reset function to restore all setting ...