HIMS E-bot ADV Operation & User’s Manual

Congratulations on your purchase of the E-bot Advanced. The E-bot, short for Education Robot, is a transportable video magnifier designed to meet the needs of the low vision student in a variety of situations. However, its flexibility and versatility make it an excellent product for low vision users of all ages. The E-bot provides close-up and distant magnification as well as OCR and connects to a variety of devices including monitors, comput ...

3) Use only the AC adapter provided with the E-bot. Using another AC adapter may damage the device. Be advised that damage caused by misuse is not covered by the warranty. 4) Please do not remove the power cable when the E-bot is turned on as this can damage the product. 5) Do not use the E-bot in a moisture-rich environment such as a bathroom, shower or a wet kitchen counter as moisture may get inside the unit and damage the components. 6) ...

Table of Contents 1. Package Contents .................................................................................... 7 2. E-bot Orientation ..................................................................................... 8 2.1 Overview of E-bot .............................................................................. 8 2.2 Back Side of E-bot ............................................................................. 8 2.3 ...

6.9 Main Body Channel Values .............................................................. 35 6.10 Volume Up/Down .............................................................................. 36 6.11 Turning Wi-Fi On/Off ........................................................................ 36 7. Using the Wireless Controller ................................................................ 38 7.1 Inserting the Battery .................. ...

FCC warning ................................................................................................. 80 ...

1. Package Contents When you receive your E-bot, please make sure that the following items are included with your package. 1) E-bot 2) E-bot Battery 3) Wireless Controller 4) AAA Battery for Wireless Controller 5) AC Adapter 6) Cables (USB 3.0, HDMI) 7) HDMI to DVI Gender adapter 8) Carrying Case 9) Headphones 10) User Guide 11) PC and Mac Installation Program CD ...

2. E-bot Orientation 2.1 Overview of E-bot 2.2 Back Side of E-bot Camera Close-up Lens Camera Arm Control Panel Table Arm Lock Button ...

2.3 Side of E-bot USB 3.0 Port HDMI Port Battery Release Button DC OUT Port DC IN Port Channel Switch ...

2.4 Front of E-bot 2.5 Front of Wireless Controller Power Button Mode Button Zoom Button Contrast Button Light Button Power Indicator Wi-Fi Indicator ...

2.6 Back Side of Wireless Controller Battery Battery Cover Power Switch Channel Switch ...

3. E-bot Setup 3.1 Unfolding the E-bot Follow the instructions below to unfold the E-bot. ① Press and hold the arm lock button on the left side of the E- bot. ② While holding the arm lock button, unfold the longer camera arm upward. ③ Then, grip the camera part and unfold it upward as well. ...

④ The E-bot is ready for use. 3.2 Folding the E-bot ① Grip the camera part and fold it downward. ...

② While holding the arm lock button, fold the longer camera arm downward. 3.3 Inserting the Battery ① Grip the E-bot’s main body and insert the battery. ② When the battery is fully inserted, you will feel and hear it click in to place. ...

3.4 Removing the Battery ① Lift the battery release button on the back side of the unit. ② While lifting the battery release button, pull the battery out of the compartment. 3.5 Charging the E-bot 3.5.1 Charging via the AC Adapter ...

① The DC jack is located on the back side of the E-bot. ② When E-bot is connected to the AC adapter, the battery is being charged. ※ Note: When you use the E-bot for the first time or after a long period of disuse, please allow the unit to charge for more than 5 hours. 3.5.2 Charging via USB ① Connect the flatter end of the USB 3.0 cable to the USB port on your PC. ② Connect the smaller, larger end of the USB 3.0 cable to the USB ...

Power Indicator appears red. When the battery is fully charged while E-bot is turned on, the Power Indicator color is changed to green. When the battery is being charged while E-bot is turned off, the Power Indicator appears red. When the battery is fully charged while E-bot is turned off, the Power Indicator is not lit. ...

4. How to Connect to Display Devices E-bot is compatible with various types of display devices, such as desktop video monitors, laptop computers, and Apple or Android tablets. 4.1 Connecting a Monitor via HDMI ① Plug the monitor's power cord into a power outlet. ② Connect the HDMI cable to the HDMI port on the monitor. ③ Connect the opposite end of the HDMI cable to the HDMI port on the rear of the E-bot. ※ Note: If the monitor ha ...

※ Note: The DC OUT port is used only for connecting the portable monitor. Please do not connect USB drives or other USB devices to the DC out port. 4.3 Connecting to a PC or a Mac Recommended PC specifications are as follows: Ÿ USB 3.0 support Ÿ CPU: i5 Ÿ RAM: 4GB Ÿ Graphics: 1GB ※ Note: Tablets running full Windows are also supported. However, you cannot use the E-bot Viewer on tablets running Windows RT. ※ Note: PC� ...

④ When you press this “I Agree” button, will pop up following window for selecting the installation path. ⑤ In the installation path window, select the path and click Install button. ⑥ Disconnect the E-bot from the PC, and proceed with the installation. ...