HighPoint RocketRAID 2700 SAS Operation & User’s Manual

HBA series SAS/SATA 6Gb/s RAID Host Adapters User’s Guide Revision: 2.3 Jul. 23, 2015 HighPoint Technologies, Inc. ...

International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed in any form and for any purpose without the express written permission of HighPoint Technologies, Inc. Trademarks Companies and produc ...

1 FEATURES AND SPECIFICATIONS ............................................................................................................ 4 2 Physical Specifications ........................................................................................................................... 5 3 Kit Contents ................................ ...

RocketRAID 272x/271x Host Adapters The RocketRAID 272x/271x host adapters are high-performance SAS RAID solutions, delivering reliability to demanding data-intensive applications such as tiered storage environments, security and surveillance, video editing, and digital content creation. Support for both 6G ...

• Online array roaming • SHI (Drive analysis driven from S.M.A.R.T) HighPoint RAID Management (HRM) • Hot key (ctrl-h) boot-up RAID manager via BIOS • Web browser-based RAID management software (Web GUI) • Command Line Interface (CLI) Operating System Support • Windows 7, 8, 8.1, 10 / Wi ...

x Host Adap D 2710 D 2720 6 tallation pter board layout Rocke Rock etRAID 2711 ketRAID 272 1 21 ...

F1 or F2 BEEP1 PORT1~ POR (Mini-SAS Po A 4.3 I Note The R the lo 1. O 2. R 3. G c Connector a / Jumper RT3 ort) Active/FAIL LE This connecto requirement http://www.h Installing th e: Make sure t RocketRAID 27 ow-profile bra Open the syst Remove the P Gently insert t chassis (illustr R and Jumper RocketRA 2710 Active ...

tached to the anual for prop Close and sec Verifying In e the host ada the hardware Power on the will be display Press “Ctrl”+” g the adapter, ver-level chass chassis backp per installation cure the system nstallation pter and hard is properly re e system. If the yed during ...

es are detecte k the power a s “Ctrl”+”H” ke BIOS Settin RocketRAID 27 controller rela Using the B following keys – press Alt to h w keys – use t r – Open the s – move ba ...

can be used t Creating RA alizing Disk re creating a iguration info ER. light the targe selected disk ask you to pre te RAID arrays ning: Initializa s that do not c ating Arrays ct Create from mmand is used to create array AID Arrays ks: R ...