IBT Technologies IB980 Operation & User’s Manual
Read Online
Read the IBT Technologies IB980 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
PICMG 1.3 SHB Express Full-Size CPU Card USER’S MANUAL Version 1.0 ...
Acknowledgments AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel® 4th Generation Core DC/QC Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Fintek is a registered trademark of Fintek Electronics Corporation. All other product names or trademarks are properties ...
iii Table of Contents Introduction ....................................................... 4 Product Description............................................................. 4 Checklist .............................................................................. 5 IB980 Specifications ........................................................... 6 Board Dimensions ............................................................... 8 Insta ...
Introduction Product Description The IB980 PICMG1.3 SHB is based on the latest Intel® Q87 chipset. The platform supports 4th Generation Intel® Core processor family with LGA1150 packing and features an integrated dual-channel DDR3 memory controller as well as a graphics core. The latest Intel® processors provide advanced performance in both computing and graphics quality. This meets the requirement of customers in the gaming, P ...
5 Checklist Your IB980 package should include the items listed below. The IB980 PICMG1.3 SHB This User’s Manual 1 CD containing chipset drivers and flash memory utility Serial ATA cable ...
IB980 Specifications Product Name IB980AF (Support LVDS, w/o LPT) IB980F (Support LPT, w/o LVDS) Form Factor PICMG 1.3 SHB Express Full size CPU card CPU Type - 4th Generation Intel® CoreTM i7/i5/i3/Pentium DT processor - FCLGA1150 package [37.5 mm x 37.5mm] - TDP: QC=84W/45W ; DC=54W/35W CPU Speed Up to 3.8GHz Cache Up to 8MB BIOS AMI BIOS CPU Socket LGA1150 Chipset Intel® Lynx Point DT Platform Controller Hub, Q87 ...
7 2x5 pins pin-header x 2 for USB 2.0 x 4 2x10 pins box-header x 1 for USB3.0 x 2 2x6 pins pin-header x1 for Audio (Line-Out, Line-In & Mic) 2x5 pins pin-header x 1 for Digital I/O 2x4 pins pin-header x 1 for PS/2 KB/MS 4 pins pin-header x1 for CPU fan (PWM mode) 3 pins pin-header x1 for system fan (DC mode) 4 ports x SATAIII (Blue connectors) 2X10 pins pin-header x 1 for front panel indicat ...
Installations This section provides information on how to use the jumpers and connectors on the IB980 in order to set up a workable system. The topics covered are: Installing the CPU ................................................................................ 10 Installing the Memory .......................................................................... 12 Setting the Jumpers .................................. ...
11 Installing the CPU The IB980 board supports an LGA1150 Socket (shown below) for Intel Sandy Bridge processors. To install the CPU, unlock first the socket by pressing the lever sideways, then lift it up to a 90-degree. Then, position the CPU above the socket such that the CPU corner aligns with the gold triangle matching the socket corner with a small triangle. Carefully insert the CPU in ...
Installing the Memory The IB980 board supports four DDR3 memory socket for a maximum total memory of 16GB in DDR3 DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the memory slot. 2. Gently push the DDR3 module in an upright position u ...
13 Setting the Jumpers Jumpers are used on IB980 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB980 and their respective functions. Jumper Locations on IB980 ................................................................. 14 JBAT1: ...
15 Jumpers on IB980 ............................................................................. Page JBAT1: Clear CMOS Contents ............................................................ 16 JP1: COM1 RS232 RI/+5V/+12V Power Setting ................................ 16 JP7: Flash Descriptor Security Override (Factory use only) ................ 17 JP11 LVDS Panel Power Selection ........... ...
JBAT1: Clear CMOS Contents JBAT1 Setting Function Pin 1-2 Short/Closed Normal Pin 2-3 Short/Closed Clear CMOS JP1: COM1 RS232 RI/+5V/+12V Power Setting JP1 Setting Function Pin 1-3 Short/Closed +12V Pin 3-4 Short/Closed RI Pin 5-3 Short/Closed +5V 1 3 5 1 6 2 ...
17 JP7: Flash Descriptor Security Override (Factory use only) JP7 Flash Descriptor Security Override Open Disabled (Default) Close Enabled JP11: LVDS Panel Power Selection JP11 Setting Panel Voltage Pin 1-2 Short/Closed 3.3V (default) Pin 2-3 Short/Closed 5V 1 2 ...
JP14: BL_ADJ_LEVEL Setting JP14 Function Open 3.3V(default) Close 5V JP13: BL Voltage TYPE Setting JP13 Setting Function Pin 1-2 Short/Closed DC MODE Pin 2-3 Short/Closed PWM MODE ...
19 Connectors on IB980 Connector Locations on IB980 ............................................................ 20 J1: COM1 and COM2 Serial Ports ...................................................... 21 J2: COM3 and COM4 Serial Ports ...................................................... 21 CN3, CN4, CN5, CN6: SATA3 Connectors ........................................ 21 CN7: DB-15 VGA Conn ...
