iCandy Peach 3 Instruction Manual
Text of the manual
Welcome to the world
of iCandy
IMPORTANT: Keep these instructions for future reference.
Read carefully. Your child’s safety may be affected if you do
not follow these instructions.
WARNING: It may be dangerous to leave your child unattended.
If you have any problems or queries, please contact your local
stockist or read the FAQ’s at www.icandywor
iCandy Peach Instructions
Contents
Section 1
- Chassis
Section 2
- Seat Unit
Section 3
- Bassinettes
Section 4
- Peach “Blossom”
Section 5
- Peach “Blossom Twin”
Section 6
- Single Stroller Car Seat Adaptors
Section 7
- Blossom Stroller Car Seat Adaptors
Section 8
- iCandy Peach Configurations
Section 9
- Accessories
Section 10 - Important S
Section 1 - Chassis
Contents:
Chassis including:
• front wheels & basket
• rear wheels x 2 • axles x 2
Seat unit including:
• Canopy • bumper bar
• PVC raincover
1. To fit rear wheels to chassis:
Depress axle button to engage as
shown. Check security of wheels
by pulling outwards.
2. To open the chassis: Release
the hold together
5. Brakes: Press down on pedal to
engage. Lift up to release.
6. Front wheels: Can be selected in
fixed or swivel position. (Swivel position
required for folding chassis).
7. Handle height adjustment: Adjust
handle height to desired position (x4)
by depressing button and pulling up.
To fold chassis: (Remove seat /
bassinette before folding): Unload
9. As the hub locks release: move /
rotate handle down.
10. Pull up basket frame at centre using
carry strap or hinge joint, allowing
the front frame and wheels to move
inwards.
11. Secure folded chassis using hold
together clip (Please note: the chassis
will only fully close & stand upright if
the front wheels are selected to swivel
& the handle i
Section 2 - Seat Unit
Important: The seat frame movement
mechanism is supplied in the store /
transport position.
1. To operate: Depress and hold both
the outer frame release ring and the
centre recline button simultaneously
before rotating leg to centre position as
shown. Action on both sides of frame
before fitting to the chassis.
Important: Failu