Fujitsu fi-4530C Consumable Replacement And Cleaning Instructions

fi-4530C & fi-5530C CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS CG00000-718301 Revision C ...

2 Cotton Swabs Qty 1 100/pack F1 Cleaner Isopropyl Alcohol Qty 1 Cleaning Paper Qty 1 10/pack Lint Free Cleaning Cloths Qty 2 20/pack Pad Assembly Qty 5 Pick Roller Qty 2 KIT CONTENTS Note: Kit Contents may Vary ...

CONSUMABLES LIST Description Qty Life Fujitsu P/N Pick Roller 1 200,000 PA03334-0001 Pad Assembly 1 100,000 PA03334-0002 Note: Replacement Cycles are estimated guidelines established by testing with A4/Letter sized woodfree and wood based 17 lb paper. NCR or Carbonless paper has chemical ...

4 REPLACING THE PAD ASSEMBLY • Remove all documents from the ADF Paper Chute. Open the ADF by pressing the ADF button. • Remove the Pad Assembly by pressing on the top of the pad assembly and sliding it to the left to remove. • Attach the new Pad Assembly by inserting the claws in th ...

REPLACING THE PICK ROLLER • Remove all documents from the ADF paper chute and take it off of the scanner. • Open the ADF using the ADF button. • Pinch the knobs on the sheet guide and lift to remove it from the scanner. Be careful not to let the ADF close while your fingers are in ...

6 • Lift the Pick Roller Shaft out of the scanner in the direction of the arrow. The bushing is fixed to the shaft on the end shown. On the opposite end of the shaft the bushing is loose and will fall off. Use caution so you don’t loose this bushing. • Remove the loose bushing from ...

• Reinstall the Pick Roller Shaft with the new Pick Roller installed in reverse order used to remove the Pick Roller Shaft. • Be sure to lock the bushings in place on both ends of the shaft. Replace the sheet guide by pressing in the center until the guide snaps in place and is locked ...

8 CLEANING LOCATIONS AND FREQUENCIES Note: The scanner will need to be cleaned every day (or possibly more than once a day) if the following paper is scanned. • Paper with special coating such as carbonless paper. • Paper with large amount of printing. (Heavy toner or ink) • Documents ...

CLEANING THE ROLLERS WITH THE CLEANING SHEET • Set the Hopper Guides to the widest width possible. The cleaning sheets are designed to remove only loose paper dust and ink from the rollers. Use the sheet approximately every 1,000 sheets scanned. They are to be used in between the thor ...

10 • Turn Scanner power off. • Open the ADF cover by pressing the ADF button. Disconnect the AC power plug. Let the scanner cool for at least 15 minutes after operation. This is to prevent burns to your skin as the lamps will heat the surface of the glass in the feed path. • Use F1 Cl ...