Hakko Electronics FX-100 Instruction Manual

Please read this manual before operating the HAKKO FX-100. Keep this manual readily accessible for reference. 1. PACKING LIST AND PART NAMES Please check to make sure that all items listed below are included in the package. 2. SPECIFICATIONS Output power Output frequency Dimensions Weight 50 W 13.56 MHz 127 (W) × 150 (H) × 167 (D) mm (5.0 × 5.9 × 6.6 in.) 3 kg (6.6 lb.)  Station  HAKKO FX-1001 soldering iron Cord Total Length (w/o cord) Weight (w/o cord) 1.3 m (4.3 ft.) 190 mm (7.5 in.) with T31-02D24 tip 31 g (0.07 lb.) with T31-02D24 tip NOTE: ...

When power is ON, the tip will be hot. To avoid injury or damage to personnel and items in the work area, observe the following:  Do not touch the tip or the metal parts near the tip.  Do not allow the tip to come close to, or touch, flammable materials.  Inform others in the area that the unit is hot and should not be touched.  Turn the power off when not in use, or left unattended.  Turn the power off when changing parts or storing the HAKKO FX-100.  The unit is for a counter or workbench use only.  This appliance can be used by ...

tips. 4. INITIAL SETUP A. Iron holder  This product includes two methods for cleaning the tip: a wire tip cleaner, and a sponge. Please be sure to soak the sponge in water before using. 1. Set the iron holder. 2. Put the small cleaning sponge in one of the five holes in the iron holder base. 3. Add water to the iron holder base. The small sponge will keep the large sponge moist through capillary action. 4. Wet the large sponge, squeeze it dry and put it on the iron holder base. B. Handpiece cord assembly 1. Pass the iron cord through the hole in the heat resistant pad. ...

　SHOW TIP TIME 　SELECT PROFILE 　TIP TYPE 　　MANUAL SET* HAKKO FX-100 has 3 operation buttons. The operation executed by each button varies depending on what is on the display screen. The operation for each button is indicated at the bottom of the screen. Select the button according to the indication. By pressing certain buttons from the home screen, the display will change, revealing the button labels and waiting for your selection. Left button MODE Center button DSP (Display) Right button SET (Parameters) If no button is pressed, it will go back to the home screen. 5. OPERATION Controls and d ...

The selected information will be displayed on the screen. SHOW PROFILE The set profile information (Station, User, and Solder) is displayed. SHOW TIP LOADS The soldering count is displayed. By selecting RESET and then OK, the count is reset to 0. To escape without resetting, select CANCEL. SHOW TIP TIME The cumulative running time on the iron tip is displayed. * Not including shut-off period. By selecting RESET and then OK, the period is reset to 0. To escape without resetting, select CANCEL. SELECT PROFILE The profile information to be displayed is selected here. Profile information No.1 or No.2 can be sel ...

＜０１＞ Ｎ When MANUAL SET is selected ＡＵＴＯ　ＤＥＴＥＣＴ ＭＡＮＵＡＬ　ＳＥＴ ＯＦＦ ＜↑＞　　＜↓＞　　＜ＯＫ＞ ▲ ＜０１＞ ＜０２＞ ＜０３＞ ＜↑＞　　＜↓＞　　＜ＯＫ＞ ▲ 5. OPERATION TIP TYPE The tip type (450°C or 400°C) is displayed. When MANUAL SET is selected, the screen changes to the one as shown in the lower right figure. Select an appropriate number according to the tip to be used. Then, the tip type 01 (450°C) or 02 (400°C) is displayed so that the tip type is clearly known. When AUTO DETECT is selecte ...

Setting AUTO SHUTOFF ＡＵＴＯ－ＳＨＵＴＯＦＦ　ＳＥＴ 　　　ＮＯＷ：３０ｍｉｎ ＜ＯＦＦ＞　＜３０ｍ＞＜６０ｍ＞ Setting PASSWORD LOCK ＰＡＳＳＷＯＲＤ　ＬＯＣＫ ＜ＯＮ＞　　　　　　　＜ＯＦＦ＞ PASSWORD input screen (When ON is selected) ＰＡＳＳＷＯＲＤ 　　　　Ａ■■ 　＜↑＞　　＜↓＞　　＜ＯＫ＞ AUTO SHUTOFF The time to automatically turn off the soldering station can be set up. Electricity is stopped automatically when the solder iron is not used for the set period of time. SHUTOFF function is canceled by pressing one of the ...

PROFILE The profile information can be set up. STATION ID: Station name, Asset ID, etc., PROFILE1,2: User name and solder information. ALERT TIME "CHG TIP" is displayed on the home screen when the iron tip cumulative running time reaches the set period. To clear this display, you need to change the tip and reset the TIP TIME from the DSP menu. (See 5. How to Use, “SHOW TIP TIME”.) PROFILE画面 When STATION ID is selected ＳＴＡＴＩＯＮ　ＩＤ ＰＲＯＦＩＬＥ　１ ＰＲＯＦＩＬＥ　２ ＜↑＞　　＜↓＞　　＜ＯＫ＞ ＵＳＥＲ　ＮＡＭＥ ＳＯＬＤＥＲ　ＴＹＰＥ ＜ＣＡＮＣ� ...

1. Using the cleaning sponge 2. Using the cleaning wire Use the cleaning sponge that comes with the product to clean the tip. It offers wide-ranging uses, from simple removal of excess solder to complete elimination of matter occurring as a result of oxidization. Material that is not removed easily with the cleaning sponge can likely be removed using the cleaning wire. ● Tip Maintenance 1. Set the temperature to 250℃ (482℉). 2. When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip. 3. If the solder plated part of the tip is covered with ...

Item No. 1 2 3 Part No. B5002 B5003 B5004 B5005 B2403 B3011 B2987 Part Name P.W.B Transformer Transformer Transformer Fuse/250V-2A Fuse/250V-2A Fuse/250V-1A Specifications 100 - 110V 120V 220 - 240V 100 - 110V 120V 220 - 240V ● HAKKO FX-100 Starion Item No. 1 2 3 4 Part No. A1559 B5009 B3751 A1561 Part Name Cleaning sponge Iron holder base / Blue-yellow Bottom plate Cleaning wire Specifications with rubber foot with Protective Sheet & rubber foot ● Iron Holder Parts Part No. B5006 B5007 B5008 FX1001-51 B2300 FH800-51BY Part Name Sleeve / Yellow Sleeve / Green Sleeve / Gray HAKKO FX-1001 Heat resistand pad HAKKO FH-800 Specifications ...

OVERSEAS AFFILIATES U.S.A.: AMERICAN HAKKO PRODUCTS, INC. TEL: (661) 294-0090 FAX: (661) 294-0096 Toll Free (800)88-HAKKO 4 2 5 5 6 http://www.hakkousa.com HONG KONG: HAKKO DEVELOPMENT CO., LTD. TEL: 2811-5588 FAX: 2590-0217 http://www.hakko.com.hk E-mail:[email protected] SINGAPORE: HAKKO PRODUCTS PTE LTD. TEL: 6748-2277 FAX: 6744-0033 http://www.hakko.com.sg E-mail:[email protected] Please access to the following address for the other Sales affiliates. http://www.hakko.com HEAD OFFICE 4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JA ...