IDTECH Kiosk III Operation & User’s Manual

Page2 of 18 Copyright© 2014, International Technologies and Systems Corporation. All rights reserved. ID TECH 10721 Walker Street Cypress, CA 90630 USA This document, as well as the hardware and software it describes, is furnished under license and may only be used in accordance with the terms of such license. The content of this ...

Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio f ...

1 Overview ...................................................................................................... 5 1.1 Features ............................................................................................................... 5 1.2 Valid Payment Applications .................................................................... ...

Page5 of 18 1 Overview The ViVOpayKiosk III is a compact stand-alone contactless reader designed to support contactless transactions based on ISO 18092, ISO 14443 Type A/Type B/MiFare compatible cards, fobs and tags as well as NFC phones. The ViVOpayKiosk III is comprised of a compact controller module and an antenna module packag ...

Page6 of 18 1.3 Kiosk�III�Specifications� Hardware MTBF 500,000 hrs based on Telcordia Technologies SR-332 modeled at 40° C. Transmitter Frequency 13.56 MHz +/- 0.01% Transmitter Modulation ISO 14443-2 Type A Rise/Fall Time: 2-3 µsec. Rise, < 1 µsec fall ISO 14443-2 Type B Rise/Fall Time: < 2 µsec. each; 8% - 14% ASK ISO ...

Page7 of 18 Transit Humidity 5% to 95% non-condensing, duration 1 week Operating Environment Water resistant for indoor and outdoor use Controller Operating Temperature 5° C to 50° C (41° F to 122° F), max change of 10° C per hour Storage Temperature -10° C to 50° C (14-° F to 122° F), duration 3 months Transit -40° C to ...

Page8 of 18 2 ViVOpayKiosk III Installation This section provides information on how to install the ViVOpay Kiosk III on a kiosk. 2.1 Parts�List� Verify that you have the following hardware for the installation of the ViVOpayKiosk III: • ViVOpay Kiosk III Controller • ViVOpay Kiosk III Antenna (either square or angle bezel ...

Page9 of 18 2.2 Mounting�the�ViVOpay�Kiosk�III�External�Antenna� Use the following instructions to mount the antenna on the exterior of the kiosk: Note: Verify the orientation of the ViVOpay Kiosk III Antenna before marking and drilling the holes. The two larger holes should be located towards the top of the mounting ...

Page10 of 18 7. Align the four screws with the mounting holes and attach the ViVOpay Kiosk III to the outside surface. Make sure that the cable is not pinched or binding. 8. Use the four nuts to secure the ViVOpay Kiosk III to the outside surface of the kiosk. Make sure to tighten the nuts securely so that the ViVOpay Kiosk III do ...