Elsema Eclipse MCS Setup Manual

Setup and Technical Information Includes latest Intelligent Technology Motor Controller Single Gate with Eclipse Operating System (EOS) 3rd Edition ® Eclipse® MCS ...

understanding all instructions carefully. All wiring should be done only by trained technical personnel. Failing to follow instructions and the safety warnings may result in serious injury and/or damage to property. Elsema Pty Ltd shall not be liable for any injury, damage, cost, expense or an ...

Menu Structure ............................................... 6-7 Connection Diagram ...........................................8 Supply an ...

› Suitable for single swing and sliding gates › Single motor operation › Eclipse Operating System (EOS) › Motor soft start and soft stop › Slow speed and force adjustment › Large 4-line LCD to indicate controllers status and setup instructions › 1-Touch control for easy ...

Part Number: Part No. Contents Part No. Contents MCS Single gate and door controller for 24 / 12 Volt motor, card only MCS24E Single controller for 24 Volt motors includes IP66 rated plastic enclosure and transformer MCS12E Single controller for 12 Volt motors includes IP66 rated plastic enclosure and transformer MCS24E2 Same as MCS24E p ...

1.0 Auto Close 1.1 Auto Close Time 1.2 AC Time with PE Trig 7.1 RC Open only 7.2 Holiday Mode 4.1 Stop & Open on Close Cycle 13.1 Events History 13.2 Display Operations / Currents 2.1 PA Travel Time 2.2 PA AC Time 5.1 Relay Output 1 Lock / Brake 6.1.1: Open Lock Activation 6.2.1: C ...

7.3 Energy Saving 13.3 Reset Max Current Records 13.4 EXIT 2.3 PA AC Time with PE Trig 6.4.1: Service Counters 6.3.1: Pre-Open Warning Light 6.4.2: EXIT 6.3.2: Pre-Close Warning Light 6.3.3: EXIT 5.3 EXIT 9.3 Slow Speed (%) 9.4 Open Slow Speed Area 8.4 Obstruct Det Response 9.5 Close Slow Speed Area 8.5 EXIT 7.4 Automatic Stop/Open ...

2 Normally Closed User can change Fuse Relay Open Close Stop Master Control AC Supply AC Supply AC Supply AC Supply AC Supply AC Supply DC Output + DC Output - AC Supply AC Supply Motor Motor AC Supply AC Supply Battery + Battery - Open Limit Common Close Limit Push Button Open Close Stop Common PED Access Photo Beam + 12 VDC - 12 VD ...

Always switch off power before doing any wiring. Make sure that all the wiring is completed and that the motor is connected to the control card. Recommended wire strip length should be 12mm for all connections to the plug in terminal blocks. The diagram below shows the supply, motors, and inputs available and the ...

This can be changed to normally open (NO) during the setup steps. Fuse Close Master Control Open Limit Common Close Limit AC Supply : 24/12 Volts AC Model : MCS Designed by ELSEMA IN AUSTRALIA AC Supply AC Supply Motor Motor ...