Electrical Test Instruments MAC-20 Instruction Manual

Text of the manual

It onitor AmmGter Gnntralter

MRG.2[T Circuit Breaker Test Set Retrofit Package lnstruction Manual itlarih tr, l9r,r9 Electrical Test Instruments' Irlc. 525 Old Westminster Pike Suite M Westminster, MD 21157 {410\ 816.4641 Fax: (41G) 848-0181

Electrical Test lnstruments MAC-20 Rekofit package

TABLE OF CONTENTS SECTION l: GENERAL INFORMATTON and SpECtFtCATtONS WARNING About This Manual Changes from Original Test Sets Trademarks lntroduction General Description Specifications SECTION ll: DETAILED DEScRIPTtON t-1 l-2 t-2 t-3 l-3 t-3 l4 Theory of Operation High Current Test Sets MAC-20 Hardware MAC-2

Eleclrical Test lnstruments MAC-20 Retrofit Package

Section I - General lnformation and Specifications sEcTtoN I GENERAL INFORMATION Copyright(C) 1994-'1998 Electrical Test lnstruments, lnc. All Rights Reserved

Electrical Test lnstruments MAC-20 Retrofit Package

Section I - General Information and Specifications sEcTtoN I GENERAL INFORMATION WARNING WARNING - READ THIS ENTIRE MANUAL AND THOROUGHLY FAMILIARIZE YOURSELF WITH THE UNIT OPEMTION PRIOR TO CONNECTING THE UNIT TO A SOURCE OF POWER, HIGH CURRENT TEST SETS ARE NORMALLY POWERED FROM HIGH CAPACITY 208 VOLT TO

Electrical Test lnstruments MAC-20 Retrofit Package

Section I - General lnformation and Specifications ABOUT THIS MANUAL This manual consists of completely new descriptive, operational, and technical informa- tion, based on many years of experience in the design, manufacturing, and operation of electrical protective device test equipment. lt is intended to p

Electrical Test lnstruments MAC-20 Retrofit Package

Section I - General lnformatton and Specifications TRADEMARKS 1. "Duffers" refers to a device manufactured by Duffers Corporation 2. "Accu-Amp" is a trademark for a device originally made by EIL lnstrOments, lnc. 3. "SmartCore" is a trademark of ZWorld Engineering, Davis, CA. INTRODUCTION A high current tes

Electrical Test lnstruments MAC-20 Retrofit Package

Section I - General lnformation and Specifications MAC-20 Specifications INPUT POWER: 120 VAC, SINGLE PHASE 50/60 HZ, 20 VA Max CURRENT RANGES: 0-1,000 / 5,000 / 25,000 / 100,000 Amperes CURRENT ACCURACY: +^ 0.5% Reading + 0.5% Full Scale + 1 Digit (Continuous) +/-'1.0% Reading + 1.0% Full Scale + 1 Digit (

Electncal Test tnstruments MAC-20 Retrofit Package

Section lll - Detailed Description sEcTtoN il DETAILED DESCRIPTION Copyright(C) 1994-'1998 Electricat Test lnstruments, tnc. Alt Rights Reserved

Other Controller Manuals