FLOWROX SKW Series Installation, Operation And Maintenance Instructions

Original document language: English Installation, operation and maintenance instructions for Flowrox Slurry Knife Gate valves SKW DN50 –600 (Wafer) and SKF DN80 –600 (Flanged) These instructions must be read carefully and understood prior to the installation, use, and servicing of this product. N O T E FLOWROX OY P.O. Box 338 FI-531 ...

(”FLOWROX”) WHICH REMAINS THE SOLE OWNER OF THESE RIGHTS. OWNERSHIP OF THESE RIGHTS ARE NOT TRANSFERRED FROM FLOWROX TO ANYONE IN CONNECTION WITH THIS MANUAL. THIS MANUAL IS INTENDED TO BE USED ONLY BY FLOWROX´S CUSTOMER AND EXCLUSIVELY FOR THE PURPOSES OF THE ...

1 DIRECTIVE CONFORMANCE DECLARATIONS ............................................ 4 1.1 General safety instructions ........................................................................ 5 2 INTRODUCTION .............................................................................. 6 2.1 Applications and purpose of use ................... ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG 1 DIRECTIVE CONFORMANCE DECLARATIONS FLOWROX OY Marssitie 1 P.O. Box 338 FI-53101 Lappeenranta Finland Tel. +358 201 113 311 hereby declares that the Flowrox Slurry Knife Gate valve, Wafer (SKW) and Slurry Knife Gate valve, Flanged (SKF) comply wit ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG 1.1 General safety instructions The symbols in Table 1 are used in this manual to highlight the parts requiring particular attention. Table 1.Warning and safety signs. Symbol Description Risk to personal safety: Neglecting the safety measures can c ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG 2 INTRODUCTION 2.1 Applications and purpose of use Flowrox Slurry Knife Gate valves (SKW) and (SKF) are intended for industry medium and slurry applications. They are bi-directional and are installed between flat flanges to shut-off or open flow wi ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG 2.2 General description 2.2.1 Principle of operation Flowrox SKW and SKF valves are built with a cast or welded body and feature a heavy-duty stainless steel gate as a standard structure. Removable ring sleeves on both sides of the gate provide a b ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG The valve must not be used to throttle in any way, nor should the gate be left in partially opened or closed position as this will lead to premature failure. This valve is intended for on-off operation only. Ring sleeves are easily replaced, and ar ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG SKW valve part list is shown in Table 3 and the exploded view in Figure 3. Part quantities are not displayed if they are valve size or actuator type dependent. Figure 3.Exploled view of SKW valve Table 3.SKW valve part list Part Qty Description Par ...

Contents are subject to change without notice. SKW/ SKF-2015-09-ENG SKF valve part list is shown in Table 4 and the exploded view in Figure 4. Part quantities are not displayed if they are valve size or actuator type dependent. Figure 4.Exploled view of SKF valve Table 4.SKF valve part list. Part Qty Description P ...