gc AADVA IOS 100 P Manual
Text of the manual
IOS 100 P
1
Table of Contents
1
Table of Contents ...............................................................................................................................2
2
Manual for AADVA IOS 100 P .............................................................................................................4
3
Symbols and warnings ...
IOS 100 P
37
Information for electromagnetic compatibility (EMC) .....................................................................17
38
Identification plate and labelling......................................................................................................19
39
Device specifications and classifications .....................
IOS 100 P
2
Manual for AADVA IOS 100 P
The AADVA IOS 100 P Instruction for use (IFU) is intended for health professionals (including but not limited to dentists). The
completeness and accuracy of this manual have been tested to the best of our knowledge. The information within may be subject to
change without prior notice. The unit may be oper
IOS 100 P
•
Intactness/integrity of AADVA IOS 100 P;
•
Unusual running noises, vibrations, etc…
•
Correct functioning of all parts;
•
Illuminating power of scanner.
If any of the above items is observed, please contact your local GC Digital Services
Maintenance and repair of parts by third parties is forbidden and voids the warranty
IOS 100 P
The application device for scanning is an optic-electronic device that captures high-resolution video images in real time during a patient
scan. It is connected to the laptop via a USB 2.0 high-speed cable for data transfer. The application device comprises of optics and sensor
electronics, which detect the real-time images which can
IOS 100 P
Figure 5: Laptop PC
Please note
Do not connect the scanner device (handpiece) and cradle to any other PC than attached to this product.
IOS 100 P
Caution
The application device is fragile, please use caution when handling.
18
Installation
1.
Connection the power
Connect the power adapter to the PC.
2.
Connecting the cradle
Place the handpiece on the cradle.
Connect the micro B connector side of the USB cable to the micro USB port of the cradle.
Connect the Type A connector sid
IOS 100 P
4.
Starting up the PC Switch on the PC
5.
Starting up software
There is an icon named "Aadva IOS GUI" on the screen, please double click this icon.
When the software starts up, the following login screen is displayed.