Emerson Rosemount 304 Product Data Sheet

Text of the manual

Product Data Sheet

August 2016 00813-0100-4733, Rev PE  Factory assembled, leak-tested, and calibrated  Full breadth of offering including integral, in-line, and conventional  Integral design enables “flangeless” connection to instrument  Block and bleed, 2-, 3-, and 5-valve configurations  Compact, lightweight design  Easy in-process c

Rosemount 305 Integral Manifold

See “Rosemount mounting brackets” on page 27.  Assembles directly to transmitter, eliminating need for flange  2-, 3-, and 5-valve configuration  Available with vertical or horizontal process connections  Compact, lightweight assembl

The block-and-bleed configuration is available on the Rosemount

306 Manifold for use with in-line gage and absolute pressure transmitters. A single isolate valve provides instrument isolation and a bleed screw provides drain/vent capabilities. Rosemount 306 Man

The 5-valve configuration is available on Rosemount 305 and 304

Manifolds for use with differential pressure and multivariable transmitters. Two isolate valves provide instrument isolation and one equalize valve is positioned between the high and low process connections. In addition, t

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 12

for more information on material selection. Table 2. Rosemount 305 Integral Manifold Ordering Information ★ The Standard offering represents the most common opti

Bracket for 2-in. pipe mounting, CS bolts

★ B3(9) Flat bracket for 2-in. pipe mounting, CS bolts ★ B4 SST mounting bracket for 2-in. pipe mounting, 300 SST bolts ★ B7 B1 bracket with 316 SST bolts ★ B9(9) B3 bracket with 316 SST bolts ★ BA 316 SST B1 bracket with 31

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 12

for more information on material selection. Table 3. Rosemount 306 Pressure Manifold Ordering Information ★ The Standard offering represents the most common opti

Material recommendations for NACE(3)(7)

SG Sour gas (meets NACE MR0175/ISO 15156, MR0103/ISO 17495) ★ Typical integral manifold model number: 306 R T 2 2 BA 1 1 1. Only available with 316 SST materials of construction and graphite-based packing. 2. Not available with block-and-bleed manifold ty

Specification and selection of product materials, options, or components must be made by the purchaser of the equipment.

See page 12 for more information on material selection. Table 4. Rosemount 304 Conventional Manifold Ordering Information ★ The Standard offering represents the most common

Other Digital Manifolds Manuals