Elko RFTC-150/G Manual 

Characteristics / • The wireless controller RFTC-150/G in design LOGUS90 measures the room temperature by internal sensor. On the basis of a set program it sends commands to the switching component RFSA-166M Switching fan coil. • It is possible to set automatic or manual mode. • ...

Prog AM °C °F Auto PM Display / 1. 2. 3. 4. 7. 1. Display the day of the week 2. Auto mode 3. - clock setting - lock the menu item or program - manual mode - temperature setting - output closed with heating function - output closed with cooling function - appears in case of ...

Programming / 2 Press > 2s Hidden Button - Enter the menu. 1 °C The prog is displayed. Long press ^ button to enter Programming - the type of time program is displayed. >2s 1 x Long press of the ^ key opens the type of time type selection - days*. Short presses ^ ^ goes through the ...

Settings / 1 °C >2s 1 x 2 AM PM 7 ^ ^ ^ ^ 9 8 0 6 12 18 24 10 4 / 7 3 4 °C 5 °C 6 ^ ^ Press > 2s Hidden Button - Enter the menu. The prog is displayed. Use ^ ^ to move to set. Long press ^ to enter Setup. Press ^ to unlock the RFSA-166M Compatibility Menu. Use ^ ^ address settin ...

13 * For EU countries, the time shift always occurs at 1:00 UTC, hence you need to know the time zone to see how many hours of local time to move summer / winter or vice versa. Press ^ to unlock the Time Deviation Correction setting. By ^ ^ moving the value setting (the number of sec ...

6 / 7 Replacement of a battery / Using a screwdriver, remove the lower part. Using a screwdriver, carefully pry off the molding and snap out the device from the frame. 3 Using a screwdriver, gently slide the device out from the cover - be careful not to damage the device. 4 5 Remove ...

Technical parameters / Supply voltage: Battery life: Temperature off set: Off set: Display: Backlighting: Transmission indication / function: Temperature measurement input: Temp. measurement range and accuracy: Transmitter frequency: Signal transmission method: Range in free space: Min ...