Alpha WMP-A01 Operation & User’s Manual

Alpha Networks Corporation. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Corporation. ...

Test Utility Installation:....................................................................................................................4 Configuration:..................................................................................................................................5 1.0 SCOPE...............................................................................................................................................6 1.1 DOCUMENT................................................................ ...

Test Utility Installation: 1. Unzip “ART_V0_5_b25ALL.zip” to “C:\”. 2. The utility must run on Win2000 or WinXP. Hardware Installation: Before insert the card, please execute the below instruction at first !! 1. Win2000 OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\2000 Execute the uninst_new_drv_2k.bat: Execute the inst_new_drv_2k.bat : WinXP OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\xp Execute the uninst_new_drv_xp.bat: Execute the inst_new_drv_xp.bat 2. Insert the card, then install the driver , the driver is located at Win2000 OS : C:\ v0_5_b25ALL\art_driver\bin\2000 WinXP OS : C: ...

C:\ v0_5_b25ALL\art_driver\bin\xp 2. Input the instruction: art \id=2082 Then press enter . ART TEST MODE: 1. Once utility is executed, a menu with test options will appear. To run a test, press the character key that is assigned to the test option. For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous receive test. For example: press “o” to change 11g or 11b test mode, Press “c” to continuous transmit mode . 2. Continuous Transmit Options. a. Before the Continuous Transmit test, need to press “e” first The comm ...

Continuous receive options will put the radio into receive mode to allow for radio measurements. Press ESC to return to the main Test Options menu when finished. 1.0 Scope 1.1 Document This document is to specify the product requirements for 802.111a/n Wireless Mini PCI adapter. This mPCI is based on Atheros chipset that complied with complied with IEEE 802.11n , and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband . It can be used to provide up to 54Mbps for IEEE 802.11a and 300Mbps for IEEE 802.11n to connect your wireless LAN. 1.2 Product Features y Compatible with IEEE 802.11a high ...

Wireless Mini PCI adapter. 2.1 General Requirements 2.1.1 General Section # Feature Detailed Description 2.1.1.1 Antenna Type y I-pex compatible connectors 2.1.1.2 Operating Voltage y 3.3VDC +/- 10% 2.1.13 Form Factor and Interface y Mini-PCI type III A form factor 2.2 Requirements of Reliability, Maintainability and Quality # Feature Detailed Description 2.2.1 MTBF y Mean Time Between Failure > 30,000 hours 2.22 Maintainability y There is no scheduled preventive maintenance required 2.2.3 Quality y The product quality is followed-up by Alpha Networks factory q ...

to relative humidity in the range of 10% and 90% non-condensing. 2.34 Non-Operating Humidity Conditions y The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% non-condensing Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide  r ...

environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15‐5.25GHz band are ...

Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada Statement This device complies with RSS‐210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, inc ...

environment.  This  equipment  should  be  installed  and  operated  with  minimum  distance  20cm between the radiator & your body. This device is intended only for OEM integrators ...

The end user manual shall include all required regulatory information/warning as show in this manual. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son foncti ...

Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas êtr ...

peutfonctionner  avec  une  antenne  d'un  type  et  d'un  gain  maximal  (ou  inférieur)  approuvé pourl'émetteur  par  Industrie  Canada.  Dans  le  but  de  réduire  les  risques  de  brouillage radioélectriqueà  l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte  que  lapuissance  isotrope  rayonnée  équivalente  (p.i.r.e.)  ne  dépasse  pas  l'intensité nécessaire àl'établissement d'une communication satisfaisante. 以下警語適用� ...