Alert-it P137 Quick Start Manual

Shows battery status Name of alarm will flash up when safety signal received. Bars on right show strength of signal Indicates there is an alarm system in the area, not paired to this pager. This may be OK or an error so check with the supervisor (Charger can be left permanently connected or it ca ...

Press and hold menu for 3 seconds to enter setup/menus Press to silence alarms for 5 mins You can scroll through a list of all active alarms in this window. Return to normal screen (also happens after 30 seconds) Scroll to menu item required Select items Unless enabled by the Supervisor in Funct ...

Safety Information: 1. Ensure the power cable is routed to avoid a trip hazard 2. Regularly check the power supplies for damage and potential shock risks 3. Clean and disinfect each item regularly in accordance with information on page 7 4. Ensure, by testing, that the alarm is annunciated at the ...