BE P2014EN Operation Manual

PRODUCT SPECIFICATIONS PACKAGE CONTENTS PACKAGE CONTENTS HARDWARE CONTENTS SPECIFICATIONS Model Max PSI (lbs/sq. in.) Max GPM (Gal/per min) Cold Water Volts Amps Weight (lbs.) P2014EN 2050 1.4 ü 120 13 36.4 PART DESCRIPTION QTY K Spray Gun 1 L Spray Gun Trigger Lock 1 M Spray Gun Holster 1 N Soft PVC Hose 1 O Nozzle Cleaning Wire 1 AA Axle Pin 2 BB Screw 2 CC Screw 2 DD Cotter Pin 2 PART DESCRIPTION QTY A Hose Holder 1 B Handle 1 *C ...

manual before attempting to assemble, operate, or install the product. This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the product. The symbols listed below are used to indicate this in ...

expands, your power washer will be damaged and become inoperable. Or, if storing outdoors, it is recommended you use pump saver (not included) to protect pumps. 26. NEVER use hot water with your power washer. It will overheat and damage the high pressure pump. 27. NEVER leave the power washer unattended while it is powered “ON”. 28. ALWAYS turn the water supply “ON ” before turning the power washer powe ...

make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, DO NOT attempt to assemble the product. Estimated Assembly Time: 5 minutes Tools Required for Assembly (not included): Phillips screwdriver ASSEMBLY INSTRUCTIONS PREPARATION Place a foot on the pad at the front of the lower frame (G) and then lift the power washer uni ...

installation) To lock trigger of spray gun (K), point gun away from you and turn dial to lock (“3” and “9” position). Squeeze or pull trigger to make sure it is locked. Always leave in locked position when not in use. This ensures the gun is in “safe” mode until it is ready for use. Turn dial to unlock (“12” and “6” position) to release spray gun trigger. Note: The trigger loc ...

(light will be off). • Unwind the power cord completely and plug into a grounded 120 volt outlet. • Turn the safety lock button on the spray gun to unlocked. While pointing the spray gun in a safe direction, squeeze the trigger on the spray gun until there is a steady stream of water, letting the water and air out of the hose. • Push the power button to turn the unit on (green power light will turn on). ...

fill with a properly formulated detergent or cleaner with water ratio according to instructions on the container. Close detergent tank when done filling. OPERATING INSTRUCTIONS • Always test a small area to avoid chance of damaging the surface. • When removing the detergent tank, squeeze the clamp and remove the small hose from detergent tank. Pull the detergent tank straight out. ...

Detergents • Use detergents designed for power washers. Hardware stores or home centers also have power washer detergents for different cleaning projects. The cleaning solution should be the consistency of water in order to prevent clogging your detergent bottle and nozzle. • This system applies detergent under low pressure. The cleaning power of the detergents is enhanced when applied with low pressure and enough time is g ...

and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion. (16 oz. bottle, BE part number 85.490.046) Pump Saver Instructions Follow the previous storage instructions for your power to prevent staining, protect the surface under the power washer from ...

material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure hose and all accessories from the date of purchase. The warranty is not transferable or assignable. This warranty covers replacement parts. This limited one year warranty applies only to produ ...

assembly or operation of this Electric Pressure Washer please call 1-866-850-6662 POWER EQUIPMENT ...