Bayside 1049340 Assembly Instructions Manual
Text of Bayside 1049340 Assembly Instructions Manual
Date 2017-09-26 Rev. 0001-A Factory: CHYEWO
TV Console
ITM. / ART. 1049340
Model # CSC75LC-3
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877
1. This product is for indoor domestic use only.
2. Please read the Assembly Instructions prior to assembling this product.
3. To avoid damage, assemble the product on a non-abrasive surface such as a carpet surface.
4. Refer to your assembly manual for maximum weight capacities. Load drawers and shelves from the
bottom to the top. Place heavier items in lower drawers and/or shelves. Unload drawers and shelves from
the top to the bottom before moving the
Parts and Hardware List
PART #
PART DESCRIPTION
PART FIGURE
QUANTITY
A
TV Console
1
B
Adjustable Shelf
(Pre-attached)
1
C
Cable Wheel
4
AA
Small Bolt
8+1 extra
BB
Acrylic Stopper
1
Touch-up Pen
1
Tipping Restraint
Hardware Kit
2 sets
Additional tools required (not included): Phillips screwdriver, stud finder, power drill,
and 3 mm / 0.1 in drill bit.
1. The adjustable shelf (B) is pre-installed for shipping. If the shelf position is not to your liking, adjust it to
your desired location.
2. Attach four cable wheels (C) to the backside of console with two bolts (AA) per cable wheel.
A
C
AA
A
B
B
B
3. The vented rear panel is removable. Be sure to route the cables through the side cutout, instead of through
the ventilation holes.
NOTE: You must install the acrylic TV stopper to prevent the TV from tipping when placing your flat
panel television directly on the top panel.
4. Remove the paper backing from the acrylic stopper (BB), then align the acrylic stopper into the cut-out on
the acrylic stopper template. Press down on the
6. Position the console at the desired location against a wall and adjust the pre-attached floor levelers to
correct tilting and/or level the doors.
7. Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the
tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending u
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed imme