Baumer 09 Series Operating Instructions Manual
Text of the manual
Baumer Electric AG
26.03.2013 14:43:00/tof
Frauenfeld, Switzerland
Operating instructions - Series 09 Ultrasonic Sensors RS-232
Content
1
General information .................................................................................................................... 2
1.1
General information .......
Baumer Electric AG
26.03.2013 14:43:00/tof
Frauenfeld, Switzerland
1
General information
1.1 General information
This instruction manual contains information covering installation, initial operation as well as the applicable
communication standards of the Baumer Series 09 ultrasonic sensor family. It supple
Baumer Electric AG
26.03.2013 14:43:00/tof
Frauenfeld, Switzerland
2.3 Beam columnator
Never attach a beam columnator to sensors designed for operation without beam columnator only.
Sensors with beam columnator feature extended functions (sensitivity adjustment) which are not available for
sensors without b
Baumer Electric AG
26.03.2013 14:43:00/tof
Frauenfeld, Switzerland
3
The RS-232 interface
3.1
General notes
• Step 1: Setting of the sensitivity mode A-D; Step 2: Teaching of the Scanning range
• In measuring mode: Yellow LED flashing = weak signal received. Conceivable corrective measures: teach
object
Baumer Electric AG
26.03.2013 14:43:00/tof
Frauenfeld, Switzerland
3.3 Sensor configuration
There are a number of sensor characteristics which can be set via command which have been defined as
configurations.
Configurations are:
•
Measuring mode (absolute measurement or relative measurement within the Tea
