Bauer RAINSTAR T32 Series Operating Manual

2 Introduction Thank you for buying BAUER RAINSTAR T ! The present manual is a very important document that describes how to operate and BAUER RAINSTAR T. This manual describes the system as detailed as possible. If you need still more information, please contact your dealer or turn directly to BAUER in Voi ...

3 Product details Type designation: BAUER RAINSTAR T Model: Series T32, T42 Serial number1: Dealer: Name: Address: Tel./Fax: Date of shipment: Manufacturer: Röhren- und Pumpenwerk BAUER Ges.m.b.H. Kowaldstr. 2 A - 8570 Voitsberg/Austria Tel.: +43 3142 200 - 0 Fax: +43 3142 200 –320 /-340 e-mail: sal ...

4 Index 1 GENERAL INSTRUCTIONS .............................................................................................................. 8 2 GENERAL .......................................................................................................................................... 9 3 SAFETY .... ...

5 9.2 TABLE FOR PRE-AND POST-IRRIGATION ............................................................................................... 56 10  WINDING MECHANISM .................................................................................................................. 57 10.1 ADJUSTMENT OF THE WINDI ...

8 1 GENERAL INSTRUCTIONS CE SYMBOL The CE symbol that has to be affixed on the machine by the manufacturer outwardly demonstrates compliance of the machine with the directives for machines and other relevant EU directives. EU conformity certificate (see Annex) This “Warning” symbol refers to important s ...

9 2 GENERAL BAUER products have been designed and manufactured carefully, subject to a system of continuous quality control. BAUER RAINSTAR models T32, T42 are turbine-driven machines designed for fully mechanised and labour-saving irrigation. System set-up, repositioning, and operation are all done with th ...

10 Power take-off 1. Drive-shaft protection tube and cone as well as the PTO guard – also on the machine side - must be mounted and in proper working order! 2. Never connect or disconnect the PTO drive shaft while PTO is running: The engine must be turned off, and the ignition key pulled out! 3. Attach t ...