Barksdale BPT1000 Installation Instructions

Rinse out and/or clean devices that have been removed before returning them to protect our employees and the environment from the hazards posed by adherent residual material in the device. Devices that have failed can only be examined safely and thoroughly when an in-depth description is p ...

Carefully read through these installation instructions prior to assembling/installing and commissioning the pressure sensor, keep the instructions in an accessible location for all users. Details about specific applications are not discussed within this document on account of the wide range of general industrial uses of th ...

In der Betriebsanleitung wird die Schwere der potentiellen Gefahren durch die nachfolgenden Gefahrenworte bezeichnet: DANGER  Do not open the connections unless they have been depressurized! Always ensure that the line is depressurized ...

 Insert the screwdriver into the installation opening to pry the terminal block (2) out of the housing (4).  Select a wire diameter appropriate for the cable entry in the housing. Slide the cable through the cable gland (7), the ring (6), the seal (5) and the housing (4).  Connect the ends ...