CAMERA LINK Q-2A340 Operating And Users Manual
Text of the manual
OPERATING AND USER MANUAL QUARTZ SERIES
3
About Adimec
Adimec is the leading supplier of high-performance digital camera modules and camera-lens
assemblies for use in three market segments: machine vision, medical imaging, and applications for
government purposes such as traffic and defense systems. In developing our products as a partner
to major OEMs aroun
OPERATING AND USER MANUAL QUARTZ series
4
Contents
1.
GENERAL INTRODUCTION
7
1.1
Product Highlights
7
1.2
About this manual
7
1.3
Standards
7
2.
PRECAUTIONS
9
2.1
Safety precautions
9
2.2
Handling
9
3.
INSTALLATION HARDWARE
13
3.1
Electrical interface - CoaXPress
13
3.2
Electrical interface - strobe and trigger
13
3.3
LED indicators
15
3.4
Quick start
15
4.
OPERATING AND USER MANUAL QUARTZ SERIES
7
General introduction
1.
The Quartz CMOS cameras described in this manual provide a range of resolutions at the highest
possible speed. All have in common a global shutter operation, CCD like image quality and reliability.
Unlike competitors who are offering general purpose cameras, our products are developed with the
OPERATING AND USER MANUAL QUARTZ SERIES
8
Liability
1.4
Adimec puts in a lot of effort in preparing this manual. Please inform your Adimec Business Office of
any inaccuracies or omissions. Adimec Advanced Image Systems B.V. cannot be held responsible
for any technical or typographical errors and reserves the right to make changes to the product and
manuals w
OPERATING AND USER MANUAL QUARTZ SERIES
9
Precautions
2.
NOTE: It is advised to include the text of this chapter in the assembly documents of the system in
which the camera is used.
A CMOS sensor camera is a sensitive device. Please read the following precautions carefully before
you continue unpacking or operating the camera.
Safety precautions
2.1
General
OPERATING AND USER MANUAL QUARTZ SERIES
10
Precautions:
Take precautions to prevent ESD that can damage the CMOS sensor.
•
Cleaning of the CMOS sensor, and assembly of the lens is preferably performed in a clean
•
room or clean bench.
Never try to clean the CMOS sensor at a relative humidity lower than 30 %. A relative humidity of
•
40 % or higher is p
OPERATING AND USER MANUAL QUARTZ SERIES
11
Cleaning of the camera
2.2.3.
The camera shall NEVER be immersed in water or any other fluid. For cleaning, only use a light moist
tissue.
Maintenance
2.2.4.
No specific maintenance other than cleaning is applicable.
Repair and modification
2.2.5.
Repair, modification and replacement of parts shall be done only by A