Becker M3 Assembly And Operating Instructions Manual
Text of Becker M3 Assembly And Operating Instructions Manual
Assembly and Operating Instructions
M3 module for BDC-i440 control units
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept safe for future reference.
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com
4041 630 049 0 �
Table of contents
General................................................................................................................ 3
Warranty .............................................................................................................. 3
Safety instructions ..........................................................................
The M3 module is a high-quality product with the following performance characterist-
ics:
• Evaluation of additional safety devices on the door (e.g. light barrier, light grids and
similar)
• Evaluation of safety devices with 8k2 terminating resistor (e.g. for wicket door,
safety edge, slack rope switch and similar)
• Evaluation of control sens
The following safety instructions and warnings are intended to avert hazards and to
prevent property damage and personal injury. It is important to follow these instruc-
tions.
General information
• In addition to the fire and accident prevention regulations, the safety
instructions given in EN 12453, EN 12978, VDE 0100, EN 50110, EN
60
approved third-party products, or modifications which have not
been agreed with or approved by us, are prohibited. We do not ac-
cept liability for damage or injury arising from such actions.
• Before connecting the power supply to the control unit for the first
time, you must ensure that the evaluation circuit boards (plug-in
modules) are plugged into the