Ameriwood HOME 9151026PCOM Instruction Manual

WWW.AMERIWOOD.COM/PARTS If a part is missing or damaged, visit our website or call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge. For prompt, reliable service please have your assembly manual ready. DO NOT RETURN PRODUCT TO THE STORE Individual stores do not stock parts. or call toll free: Recommended # of people needed for assembly: 2 (however it is always better to have an extra hand.) Estimated assembly time is 2 hours. Se localizan las traducciones españolas en el centro de este manual. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Date of Purchase ___ / ___ / ___ Please Recycle Recicle Por Favor

39118026141 left bottom 39118026151 right bottom 39118026161 left kick 39118026170 right kick 39118026180 left apron 39118026190 right apron 39118026200 front crown molding 39118026210 left lower crown molding 39118026221 right lower crown molding 39118026231 left door 39118026280 A B C D J O N P Q R K S T U V W BB

39118026300 2 pencil drawer sides 39118302310 pencil drawer back 39118302320 keyboard drawer front 39118026330 left keyboard drawer side 39118026340 right keyboard drawer side 39118026350 keyboard drawer back 39118026360 keyboard drawer bottom 39118026370 file drawer front 39118026380 left file drawer side 39118302390 right file drawer side 39118302400 file drawer back 39118302410 pencil drawer bottom K911830280 file drawer bottom K911830270 left back panel K911802630 right back panel K911802640 CC DD FF GG HH II JJ KK LL MM NN OO PP QQ RR SS EE 1 2 3 4 5 7 6 #A22570 cam lock qty: 20 #A22510 cam bolt qty: 20 #A30030 plastic catch qty: 4 #A70040 50mm grommet qty: 2 #A80250 shelf support qty: 3 #A17400 #8-32 X 7/8" machine screw qty: 10 #A60500 flap hinge qty: 2 3a 3b

screw qty: 10 #A11080 #6 x 7/16" flat head screw qty: 22 #A21110 nail qty: 36 #A53760 drawer bracket qty: 8 #A53600 angle bracket qty: 12 #A15600 drawer screw qty: 16 #A11600 #6 X 1-1/4" flat head screw qty: 8 #A12840 #8 X 1" screw qty: 8 #A12210 #8 X 1/2" pan head screw qty: 66 #A13410 #8 X 1-3/4" flat head screw qty: 11 #A60010 hinge qty: 4 9 10 11 12 14 15 16 17 18 #A56540 extension slide qty: 1 21 20 #A82120 file holder qty: 2 13 8 19 #A52150 cup pull qty: 5

lock. ½ se vuelven a totalmente cerradura. 4 Tighten to fully seat. Do not over tighten. Apriétese a totalmente asiento. No haga encima de apriétese. Proper orientation of cam. La orientación apropiada de leva. 1 This illustration shows how the CAM fastening system works. Esta ilustración muestra el sistema de fijación de leva y como funciona. Lock Apretar Titus Titus Titus #A56030 drawer slide qty: 2

and RIGHT BOTTOM (P) as shown. x 12 1 Proper orientation of CAM LOCK Posición correcta de la cerradura de leva. N P O 1 1 1 1 1

Attach one LEFT CABINET MEMBER (22a) to the LEFT PANEL (A) with three SCREWS (15) as shown. Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown in the detail. 2 15 15 2 1 15 18 12 x 1 x 1 18 12 22a Proper orientation of CAM LOCK Posición correcta de la cerradura de leva. 22a 1

x 1 Attach one LEFT CABINET MEMBER (22a) to the LEFT PARTITION (C) with three SCREWS (15). Turn the panel over and attach one RIGHT CABINET MEMBER (22b) with three SCREWS (15). On the same side insert two CAM LOCKS (1), screw two CAM BOLTS (2) and attach one PLASTIC CATCH (3a) with two SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12). 1 2 15 12 3a 15 15 12 3a 22a 22b 22b 22a 15 15 2 12 18 x 1 18 23b 1 Proper orientation of CAM LOCK Posición correcta de la cerradura de leva.

Seperate the EXTENSION SLIDE (21) by extending it until it stops, depress the plastic lever and pull apart. Complete this procedure for both slides. Attach slide to the RIGHT PANEL with three SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown. USE THESE THREE HOLES WHEN ATTACHING SLIDE. USE ESTOS TRES AGUJEROS AL ATAR LA DIAPOSITIVA. PLASTIC LEVER PLANCA DE PLÀSTICO x 2 x 4 x 4 x 1 2 12 21 1 2 21 21 12 18 x 1 18 12 1 Proper orientation of CAM LOCK Posición correcta de la cerradura de leva.

Attach one RIGHT CABINET MEMBER (22b) to the RIGHT PARTITION (D) with three SCREWS (15). Turn the panel over and attach one EXTENSION SLIDE (21) with three SCREWS (12). On the same surface insert two CAM LOCKS (1), screw in four CAM BOLTS (2), and attach one PLASTIC CATCH (3a) with two SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown. 2 15 12 3a 15 22b D 1 2 3a 12 12 12 12 15 15 15 21 21 18 x 1 12 18 22b 1 Proper orientation of CAM LOCK Posición correcta de la cerradura de leva.

Attach the FRONT CROWN MOLDING (U) to the DESK TOP (K) with five ANGLE BRACKETS (18) and ten SCREWS (12). NOTE: If you use the optional hutch (model 9902026PCOM), refer to the model 9902026PCOM hutch assembly manual to attach the desk top to the hutch assembly. Four holes need to be redrilled into through holes (only if the hutch is used). x 10 x 5 K x 8 2 12 18 18 12 12 U 2 2 2 2 2 2 2

Secure the LEFT PARTITION (C) and RIGHT PARTITION (D) to the MODESTY PANEL (J) with four SCREWS (13). If assembled correctly, there will be a 1" (2.5cm) spacing between the top edge of the partitions and the top edge of the modesty panel. J D C 13 13 13 J D 1" (2.5cm)

LOCKS (1) clockwise to lock in place. Align the RIGHT PANEL (B) and RIGHT PARTITION (D) with the RIGHT BOTTOM (P) and RIGHT FIXED SHELF (N) so that the CAM BOLTS (2) insert into the CAM LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place. finished edge acabado borde NOTE THE HOLE LOCATIONS. OBSERVE LAS LOCALIZACIONES DE LOS AGUJEROS A B C D J N P O 2 1 UNLOCK LOCK APRETAR DESAPRETAR

the DESK TOP (K) so that the CAM BOLTS (2) insert into the CAM LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place. NOTE: Adjust the moldings (S, T, V, W) for best fit when attaching them to the unit with the SCREWS (11). A K C D B J S T W V x 8 NOTE: IF YOU HAVE PURCHASED THE OPTIONAL HUTCH, YOU NEED TO FOLLOW MODEL 9902026PCOM ASSEMBLY MANUAL. (THERE ARE FOUR HOLES THAT MUST BE DRILLED THROUGH TO ATTACH THE DESK TOP (K) TO THE HUTCH PANELS). 11 11 11 1 2 UNLOCK LOCK APRETAR DESAPRETAR

SCREWS 12). Attach the RIGHT KICK (R) to the RIGHT PANEL (B), RIGHT PARTITION (D), and RIGHT BOTTOM (P) with four angle brackets (18) and eight SCREWS (12). Align both KICKS so that the mitered corner is tight by loosening the SCREWS (11) and (12), adjusting and retightening the screws. Q R A B D C P O 12 18 12 18 12 12 11 18 12 12 18 18

Position the LEFT BACK PANEL (RR) so the bottom edge of the back panel is even with the bottom edge of the LEFT BOTTOM (O), and equally spaced side to side. Fasten the LEFT BACK PANEL (RR) to the unit using eighteen NAILS (16). NOTE: When you begin to nail the back panel to the unit, make sure the unit is square with the back panel and nail straight through into the back edges of the unit. Repeat this procedure to fasten the RIGHT BACK PANEL (SS) to the unit. Por favor asegúrese que las Parte de atrás se atan firmemente. Todos los clavos deben manejarse en las partes recto y deben apretarse firmemente. El fracaso para hacer para que podría causar inestabilidad, derrumbamiento del producto, y/o la lesión seria. ADVERTENCIA Please make sure that Back Panels are attached securely. All nails must be driven into the parts straight, centered and tightened firmly. Failure to do so could cause instability, product collapse, and/or serious injury. WARNING x 36 RR SS K A B D C J O P raw surface superficie cruda 16 16 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE SER INSTALADO CORRECTAMENTE. 16

DRAWER BRACKETS (17) with two DRAWER SCREWS (9). Attach one RIGHT DRAWER RUNNER (22d) to the other PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two DRAWER BRACKETS (17) with two DRAWER SCREWS (9). Attach the drawer members of the EXTENSION SLIDES (21) to the LEFT and RIGHT FILE DRAWER SIDES (MM & NN) with two SCREWS (12) and two DRAWER BRACKETS (17) with two DRAWER SCREWS (9) each. 12 15 9 17 21 22c 22d NN MM EE EE plastic lever palanca plstica plastic lever palanca plstica 12 12 21 21 22c 22d 15 15 9 9 9 17 17 17 17 17 17

Attach the LEFT and RIGHT FILE DRAWER SIDES (MM and NN) to the FILE DRAWER FRONT (LL) with four DRAWER SCREWS (9). Attach one CUP PULL (19) with two BOLTS (6) onto the PENCIL DRAWER FRONT (DD) and the FILE DRAWER FRONT (LL). Insert SHELF SUPPORTS (5) into each of the drawer fronts. 19 5 9 6 6 6 5 9 9 9 9 EE EE 9 9 9 19 MM NN 5 LL 5 19 DD

tight against the PENCIL DRAWER FRONT (DD). Attach the PENCIL DRAWER BACK (FF) with four SCREWS (10). 10 10 10 DD EE EE PP FF finished surface superficie terminada

tight against the FILE DRAWER FRONT (LL). Attach the FILE DRAWER BACK (OO) with four SCREWS (10). Press one FILE HOLDER (20) onto each of the file drawer sides. 10 20 OO QQ NN MM LL 20 20 10 10 finished surface superficie terminada

12 3a HH II 12 12 3a 3a

the KEYBOARD DRAWER BOTTOM (KK) with seven SCREWS (13). x 7 13 finished surface superficie terminada II KK JJ HH 13

before attaching with five SCREWS (14) each. *DO NOT OVER TIGHTEN SCREWS (14).* Attach two PLASTIC CATCHES (3b) to the KEYBOARD DRAWER FRONT (GG) with four SCREWS (12). Do not tighten SCREWS (12) into the KEYBOARD DRAWER FRONT (GG) until the PLASTIC CATCHES (3b) have been adjusted to close properly. 14 12 7 3b 14 14 7 3b 12 12 12 12 3b GG HH II JJ KK

SCREWS (15) each. Attach one CUP PULL (19) to the KEYBOARD DRAWER FRONT (GG) with two BOLTS (6). 19 19 15 6 22c 22d 22d 22c 15 6 19 KK GG HH

Attach one HANDLE (19) to each door with two BOLTS (6). Secure each door to the corresponding end panel with two HINGES (8) and eight SCREWS (12). Hinges have slotted holes for final adjustment of the doors. 19 19 19 12 6 6 6 12 12 12 3b 3b 8 8 8 3b 12 12 12 12 8 8

cabinet member rodillo roller drawer runner deslizador de cajon roller rodillo x 2 Insert two GROMMETS (4) into the DESK TOP (K) by pressing evenly on all edges until fully seated. Install the PENCIL DRAWER (DD) and KEYBOARD DRAWER (GG). Install the FILE DRAWER (LL) by aligning the EXTENSION SLIDE (21) members, making sure the bearing carrier is all the way to the front before fullly closing the drawer. K DD GG LL 4 4 4 BEARING CARRIER PORTADOR DEL COJINETE

shown. Exceeding these load limits could cause unit sagging, instability, product collapse and/or serious injury. Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos limites puede causar inestabilidad, colapsarse y/o causar serias lesiones. MAXIMUM LOADS - CARGA MAXIMA ??www.ameriwood.com?? 30 lbs. 13.6 kg. 50 lbs. 22.6 kg. 25 lbs. 11.3 kg. 100 lbs. 45.3 kg. 10 lbs. 4.5 kg. 50 lbs. 22.6 kg.                                                               Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2. This certificate applies to compliance of this product with the CPSC Ban on Lead‐Containing Paint (16 CFR 1303). 3. This product is distributed by: Dorel Home Furnishings, Inc.                                                            410 East First Street South                                                            Wright City, MO 63390                                                            636‐745‐3351 4. Site of Manufacture: □   Tiffin OH 5. See front page of instruction manual for date of manufacture.