BDI VOCA 3501 Instruction Manual

NEED ASSISTANCE?­ [email protected] Congratulations on the purchase of your Voca Office Chair 3501 from BDI. Your office chair has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information to ensure that you get the most out of your product. Please save it for future reference. Your Voca Office Chair has been engineered for simple assembly. Please follo ...

VOCA 3501 HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. Do not use power tools for the assembly of this product. For all other concerns, please contact your BDI retailer. PART # C1 DESCRIPTION Backrest Assembly QUANTITY 1 PART # C ...

NEED ASSISTANCE?­ [email protected] PART # C4 DESCRIPTION Armrest (Left & Right) QUANTITY 1 of each PART # C6 DESCRIPTION Base QUANTITY 1 PART # C7 DESCRIPTION Swivel Wheel QUANTITY 5 PART # C5 DESCRIPTION Lift Column QUANTITY 1 HARDWARE AND COMPONENTS ...

VOCA 3501 Using the box as a workbench, position the (C1) Backrest Assembly as shown. Connect the (C3) Seat Mechanism to the (C1) Backrest Assembly using 3 (H1) Screws with Washers. Tighten with (T2) 5mm Hex Wrench. STEP 1. CONNECT SEAT MECHANISM ASSEMBLY PART/DESCRIPTION QTY T2-HEX WRENCH 1 H1-SCREW 3 C1 C3 C3 C1 H1 H1 H1 ...

NEED ASSISTANCE?­ [email protected] ASSEMBLY STEP 2. ATTACH ARMREST On the other end of the box, place (C2) Seat upside down. Attach (C4) Left and Right Armrest using 6 (H3) Screws and tighten with (T1) 4mm Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H3-SCREW 6 H3 H3 C4 C4 C2 ...

VOCA 3501 Position the Backrest/Seat Mechanism Assembly on top of the (C2) Seat. Attach with 4 (H2) Screws and tighten with (T2) 5mm Hex Wrench. PART/DESCRIPTION QTY T2-HEX WRENCH 1 H2-SCREW 4 STEP 3. ATTACH BACKREST / SEAT MECHANISM ASSEMBLY H2 H2 H2 H2 C2 ...

NEED ASSISTANCE?­ [email protected] ASSEMBLY ASSEMBLY STEP 4. INSTALL LIFT COLUMN STEP 5. INSTALL SWIVEL WHEELS Position the (C5) Lift Column’s narrow end into the hole on the bottom of the (C3) Seat Mechanism. Press into place. Position the (C6) Base upside down on the carpeted floor. Press the (C7) Swivel Wheels firmly into the holes until they lock. C5 C3 C6 C7 C7 C7 C7 C7 ...

VOCA 3501 Connect the (C6) Base to the chair either right side up (with base on the floor as shown) or upside down on top of the box. STEP 6. CONNECT THE BASE ASSEMBLY C6 C5 ...

NEED ASSISTANCE?­ [email protected] FUNCTION ADJUSTING BACK HEIGHT The back support assembly is adjustable with an internal lift mechanism. While seated or standing, lift the back to adjust to one of eight preset positions. To lower the back, lift it to its highest position to release the mechanism and return the back to its lowest position. ADJUSTING SEAT DEPTH To adjust the seat depth, lift the lever on the left-hand control b ...

dress, and/or copyright laws. Voca & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2021, BDI | V.04.21.2021 Made in China. WARRANTY BDI warrants to the original purchaser that this product shall be free of defects in assembly, material, or workmanship for five (5) years from the original date of retail purchase. In the event of a proven de ...