ACL 800 Operation Manual
Text of the manual
ACL 800 MEGOHMMETER
OPERATION MANUAL
Meter is warranted for one year from the date of purchase on parts and labor.
Calibration is recommended every twelve months.
ACL Inc.
Tel: 847-981-9212
840 W. 49th Place
[email protected]
Chicago, IL 60609 USA
www.aclstaticide.com
ESD CHECK ACL 880 DIGITAL RESISTANCE METER
SecƟ on
Topic
Page
I.
IntroducƟ on & DescripƟ on
4
II.
BaƩ ery InstallaƟ on
6
III.
Resistance Measurements in AutomaƟ c Mode
8
IV.
Electrifi caƟ on Period in AUTO/GO A Mode
9
V.
Measurements in Manual Mode
10
VI.
BaƩ ery Replacement
10
VII.
User Adjustments & Maintenance
11
IX.
Warranty InformaƟ on
11
Gene
Rev. B / June 2019
ACL 880 Digital Resistance Meter
I.
IntroducƟ on & DescripƟ on
The ACL 880 instrument is a digital resistance meter that measures accurately from 1.0x103 to 1.0x1012
ohms. In its AUTO mode the instrument automaƟ cally adjusts resistance range and selects test voltage
in accordance with standard pracƟ ces outlined in ANSI/ESD STM11.1
Rev. B / June 2019
ACL 880 Digital Resistance Meter
There are two main Modes of ACL 880 OperaƟ on
1. AUTO mode (Displayed as GO A): AutomaƟ cally adjusts resistance range, test voltage and Elec-
trifi caƟ on Period (EP). Measurements stops at the end of EP, Green LED is ON, measurement is
displayed for 10 seconds then instrument resets for the next me
Rev. B / June 2019
ACL 880 Digital Resistance Meter
II. BaƩ ery InstallaƟ on
•
BaƩ ery Main Power OFF
•
Open BaƩ ery Cover
•
Replace BaƩ ery (9V Alkaline)
•
Close Cover
A. Install test leads or special fi xtures as shown:
1. Slide MAIN POWER Switch to ON
2. “Go A” is the Default OperaƟ on Mode and is displayed when
MAIN POWER is ON
3. T
Rev. B / June 2019
ACL 880 Digital Resistance Meter
1. Override Displayed Data Hold: Resets the instrument for the next measurement and bypasses
the automaƟ c HOLD funcƟ on. Note that the exisƟ ng measurement in the display is discarded.
2. Used with TEST pad to change modes of operaƟ on between AUTO / GO A & CONTINUOUS /
GO C operaƟ on
3. Selects fu
Rev. B / June 2019
ACL 880 Digital Resistance Meter
Figure 9: The shield is connected to the me-
ter via the white banana plug and receptacle
Figure 10: Receptacle spacing accommodates
dual banana plug connectors.
III. Resistance Measurements in AutomaƟ c Mode
In the default AUTO mode the instrument makes range and test voltage adjustments automaƟ cally