ABB Ability Installation Manual

personnel. Failure to install the sensor in compliance with applicable codes and regulations and according to the manufacturer’s recommendations may result in electrical shock, fire hazard, unsatisfactory performance or equipment failure, and may void the sensor warranty. WARNING Only qualif ...

• 1 Clamp-action mounting bracket • 2 Hexagon socket screws (2 qty) M4 x 8 mm • 3 Hexagon socket set screw (1 qty) 1/4" x 5/16" (UNF 28) • 4 ABB Ability™ Smart Sensor Where to mount: 1. Sensor must be located between the drive-end and non-drive- end bearings, as close to the center as pos ...

match the thickness of your motor’s cooling fins. If necessary, use a vise to tighten the bracket so that it can clamp firmly onto the cooling fin. ABB ABILITY™ SMART SENSOR INSTALL ATION INSTRUCTIONS 3 Note Make sure that the bracket can be clamped to the cooling fin such that the neighbor ...

Sensor App. Log on using your myABB credentials and follow prompts to connect. 9AKK107414 REV B EN 012019 Step 8 After fastening the ABB Ability™ Smart Sensor to the bracket, ensure that the bottom plate of the sensor makes contact with the central hexagon socket set screw of the mo ...