Technique HT-01 Easy Steps Manual

Model: HT-01 Important: Do Not Use This Pressure Cooker Until You Have Read The Entire Owner’s Manual That Comes With This Unit Technique Electric Pressure Cooker Model HT-01 Easy Steps Guide Important: Do Not Use This Pressure Cooker Until You Have Read The Entire Owner’s Manual That Comes With This Unit Included in this Easy Steps Guide, you will find the following: 1) Parts List 2 2) Display Control Panel 3 3) For General Use 4 4) Glass Lid Handle Assembly 6 5) To Cook Using Preset Cooking Options 6 6) To Cook Using A Custom Cooking Time 7 7) Care and Cleaning 7 TPC_ESG_QVC_V2_110318 ...

Preset the Time – This is a Delay Time Feature. Push the PRESET THE TIME Button, and your meal will cook at a later time, from 0.5 to 10 hours later, as displayed on the left side of the LED. Optional Pressure Holding Time - This allows you to set your own Cooking Time. Push the OPTIONAL PRESSURE HOLDING TIME Button to select a Cooking time from 0 – 99 minutes, as displayed on the right side of the LED. The cooking Pressure will be 70kPa. Keep Warm/Cancel – While the unit is in a cooking cycle, or if you want to reset an incorrect cooking mode, pushing KEEP WARM/CANCEL will stop the cooking cycle/cancel the mode. When ...

Make sure the Sealant Washer is seated properly on the inner steel ring inside the Lid. (See Figure 1) 1. To remove the Sealant Washer, Pull up from the inner steel ring. The Sealant Washer should be separated from the inner steel ring for proper cleaning. 2. To replace the Sealant Washer, Press down into/around the inner steel ring. The Sealant Washer will make a clicking sound as you press it firmly into place. Figure 1 The Floating Valve found on the underside of the Lid should be able to move up and down freely only stopping when the rubber gasket meets the Lid. (See Figure 2) Figure 2 Place Inner Tank into the Outer Tank. N ...

Discharging Valve are pointed to the “10 o’clock” position. Rotate Lid counter-clockwise until Lid Handle is in line with the Outer Tank Handles, and a clicking sound is heard. (See Figures 7-8) Figures 7 and 8 Insert the Pressure Discharging Valve into the Lid Handle. Push down until it clicks. Turn the small lever on the Valve so that the SEAL mark is in line with the Floating Valve opening on the handle. Always be certain the Pressure Discharging Valve is free floating and clear of any obstructions. (See Figures 9a and b) Figures 9a and b For best results, always che ...

additional time needed to pressurize the unit before cooking begins. Full pressurization could take up to 17 minutes. Glass Lid/Handle Assembly 1. Place the small plastic washer on the screw 2. Insert the screw through the underside of lid and hold in place 3. Place the wider metal ring around the screw, with the larger diameter sitting on the top of the glass lid 4. Turn the black handle onto the screw until it fits snugly (See Figures 11a, b and c) Use the Glass Lid to cook without pressure. Press the FUNCTION MENU Button to cook. To Cook Using Preset Cooking Options ...

This mode is the easiest way to select Time settings that are less or greater than the preset defaults. You may select a time setting from 0 minutes to 99 minutes. 1) Place Inner Tank into the Outer Tank. Add ingredients as per your recipe. Rotate the Inner Tank to make certain that it is seated properly. Place Pressure Lid on unit. Rotate Lid counter-clockwise until you feel a click. IMPORTANT: Insert the Pressure Discharging Valve located on top of the Lid Handle and set it to the “Seal” position, and ensure that the Floating Valve is in a lowered position. 2) Attach AC Cord to base unit and plug other end i ...

Valve, simply pull up and the valve will release from its spring lock mechanism. Apply mild detergent and wash under warm running water. Put the Valve back in place by pushing down until it clicks. After use, unplug unit and allow to cool completely before cleaning. The Pressure Cooker must be cleaned thoroughly after each use in order to avoid staining caused by a build-up of food or cooking residue. DO NOT POUR COLD WATER INTO A HOT PRESSURE COOKER. Note: To ensure safe operation of this pressure cooker, strictly follow the cleaning and maintenance instructions after each use. Sho ...