Covert CA 3.0 Operation & User’s Manual

1.2 Camera Body Interfaces ................................................................................................. 1 1.3 Program Remote Display .................................................... ...

1 Instruction Page 1 1 Instruction 1.1 General Description The Covert CA 3.0 camera is a digital infrared surveillance camera, triggered by any movement of humans or animals monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 3M pixels) or records video clips ( ...

1 Instruction Page 2 When the camera is turned on (the power switch is slid to the ON position), the setup information will be displayed in the monitor. 1.4 Supported Format Item Format Image JPG Video AVI File format FAT32 Here are some important notices. The file system format is not a concern of the camera unless you have problems wi ...

2 Cautions Page 3 2 Cautions ★ The working voltage of the camera is 6V. The camera is supplied by four AA batteries. ★ Please install batteries according to shown polarity. ★ Please unlock the write-protect before inserting the SD-card. ★ Please insert the SD-card when the power switch is at the OFF position before testing the c ...

3 Quick Introductions Page 4 3 Quick Start Guide 3.1 Power Supply To supply power for the camera, four size AA batteries are needed. Open the bottom cover. Confirm that the power switch is in the OFF position. Install the fully charged batteries into the slot according the polarities sign shown below. The following batteries with 1.5V o ...

3 Quick Introductions Page 5 After switching the camera on, the motion indication LED (red) light will blink for about 10s. The 10s is a buffering time before automatically capturing photos or videos. This gives the operator time for closing and locking the bottom cover, adjusting the camera on a tree, and walking away. In TEST mode, it ...

4 Advanced Operations Page 6 4 Advanced Operations From the basic operations previewed in the previous chapter, we know that the camera has three basic operation modes: 1. OFF mode: Power switch is at the OFF position. 2. ON mode: Power switch is at the ON position. 3. TEST mode: Power switch is at the ON position and the remote needs t ...

4 Advanced Operations Page 7 4.1.1 Default Settings Default settings are listed below: Setting Items Default Options Submenu Camera Mode Image Video Format Enter Yes, No Video Size 640×480 320×240 Set Clock Enter Adjust Clock Capture Number 1 Photo 2 Photo, 3 Photo Video Length Avi 10 seconds Avi 1–60 seconds Interval 1 Minute 0–5 ...

4 Advanced Operations Page 8 e) Press OK to start formatting the SD-card. During formatting, the display screen will show a message “Formatting…” as below. Press MENU to cancel setting and return to info display. 4.1.4 Set Video Size The following shows how to set video size as 320×240 provided that the previous option is at 640� ...