GRAUPNER mc-16 Programming Handbook

Basic Installation Instructions......................................6 – 9 Connecting External Elements........................................10 Installing Modules ...........................................................11 Compatibility ...................................................................12 St ...

3 Using the proven computer system mc-16 as the basis of the new mc-16/20 Microcomputer Remote Control set was developed. With the series already equipped with 20 model memories, the mc-16/20 offers features to beginners and more experienced equally. The controls and ergonomically optimised ...

4 General Section High security using modern single chip computer technology. Newly developed LCD multi-data display with integrated static driver for precise, clear digital display. The extremely high contrast enables, even with bright sunlight, a precise check of the functions displayed in the transmi ...

• Sub Trim system for the neutral adjustment of all Servos and adjustment of older makes of servos with inconvenient neutral. • Servo Throw (adjustment of full servo travel) adjustable between 0 and 160%. Allows setting symmetrically or asymmetrically to allow the servo to move more less in one direction • Reverse function for all Ser ...

Opening the Transmitter case The removable back of the case is held by one locking catch and two interlock sliding catches. Before opening the Transmitter ensure the power switch is OFF. The sliding catches are moved against the direction of arrow (inward) until they hit the stop, then case back can be opened. To clos ...

Power Supply The battery tray in the transmitter is equipped with a 9.6v battery. Different battery types are available to be selected. Into the battery mounting for the receiver, insert four AA cells of 1.2v and between 500 and 600mAh. Instead of the battery mounting, or in addition, a 4.8v battery with miniature plug can be used, see pag ...

Frequency band and Channel change Change frequency band: The Transmitter can be operated on different frequency bands by changing the High Frequency module. The removable HF module is held by four sprung pin fittings in the centre of the Transmitter. Two cables must be attached. Link 1 connects to the Transmitter circ ...

Fasten the NAUTIC modules Insert the module into the intended location and that check it fits correctly. The protective plastic film on the printed fascia plate can be now taken off. Then remove the backing paper of the double sided tape and the attach the fascia plate lightly pressing it down. Insert the module from the inside into the pre ...

Module Installation Control Elements Pattern 10 General Section Model Type External Switch Connection Standard “FL” Unifly “UN” F3B/Butterfly “Fb” Aerobatic “AC” Helicopter “HE” 0 Dual-Rate and Exponential for: Aileron Roll 1 Dual-Rate and Exponential for: Elevator Pitch 2 Dual-Rate and Exponential for: Rudder Tail ...