Lectrosonics Digital Hybrid Wireless DBu Quick Start Manual

Serial Number: Purchase Date: This guide is intended to assist with initial setup and operation of your Lectrosonics product. For a detailed user manual, down- load the most current version at: www.lectrosonics.com Digital Belt Pack Transmitter 31 May 2019 Digital Hybrid Wireless® US Patent 7,225,135 all-guide s.c ...

USB Port Belt clip mounting hole Belt clip mounting hole Battery compartment door u 470.100 -40 -20 +0 DBu Battery status LED Key verification LED Menu navigation buttons Power button Return to previous screen PWR/FUNC AUDIO -20 -10 IR PORT Modulation Indicators* Programmable Function Switch Audio Input Jack An ...

ability to make changes with the keypad, and configuring the top panel switch as either power on/off or a mute function. Modulation Indicator LEDs When the transmitter is set to MUTE, the -10 Modulation Indicators LED will glow solid ...

line, lithium, or rechargeable batteries for longest life. The battery status circuitry compensates for the difference in voltage drop between alkaline and lithium batteries across their usable life, so it’s important to select the correct bat ...

clean pencil eraser. Be sure not to leave any remnants of the cotton swab or eraser crumbs inside the compartment. Contact springs Battery Status LED Indicator Alkaline, lithium or rechargeable batteries can be used to power the transmit- ter. The type of batterie ...

Press and hold the Power Button until a status bar on the LCD is completed. Hold for Rf On DBu V1.13 /1.05 470.100 -40 -20 +0 DBu When you release the button, the unit will be operational with the RF output turned on and the Main Window displayed. Powering On in Standby Mode ...

Entering the Power Menu With the unit turned on, press the power button once briefly from any menu or screen and a menu will appear with several options. Use the and ar- row buttons to highlight menu items. Then press MENU/SEL to execute the item or enter a setup screen. The following options are available: • Re ...

NOTE: The settings will be stored when the BACK button is pressed. SEL BACK Freq. Select option with arrow buttons (None, TalkBk, Power, Mute) Use arrow buttons to select value 22 Gain SEL BACK Gain Level meter at bottom of screen Freq. 470.675 Press MENU/SEL to highlight MHz or kHz SEL BACK ProgSw SEL BACK Rolloff Rolloff ...

Entering the Main Menu The LCD and keypad interface makes it easy to browse the menus and make the selections for the setup you need. When the unit is powered up in either the operating or the standby mode, press MENU/SEL on the keypad to enter a menu structure on the LCD. Use the and arrow buttons ...

Microphones, line level audio sources and instruments can be used with the transmitter. Refer to the section entitled Input Jack Wiring for Different Sources for details on the correct wiring for line level sources and micro- phones to take full advantage of the Servo Bias circuitry. Adjusting the Input Gain ...