Glide Gear Dev Dolly Pro Operation & User’s Manual

For more information please visit our website: www.glidegear.net (1) (2) (5) (3) (4) (6) (7) (8) (9) (1) Sled (2) 4x sets of wheels (3) 2x end spacers (4) 1x low profile spacer (5) 7.5” camera riser (6) Camera plate, 75mm and 100mm bowl adapters (7) 3x Baby pin adapters (8) 2x Anti-tilt brackets (9) Carry Case ...

1 Mount the 4 sets of wheels at each corner of the sled. Use the end spacers to clamp each track extremity as in the picture on the left. Use the supplied long thumb screws to lock the track into position. The Dev Dolly Pro can accommodate tracks from 1” to 2” in diameter (25 to 50 ...

3 Mount the anti-tilt brackets on each side of the sled. Bracket adjustment Adjust the position of the bracket so it goes under the track to prevent the sled from tilting out. Anti-tilt bracket ...

For more information please visit our website: www.glidegear.net Mounting holes The Dev Dolly Pro features mounting holes at the bottom of each spacer so that it can be mounted on any tripod. In addition, 3 baby stand adapters are supplied. Simply screw the adapter at the bottom of a spacer to mount the Dev Dolly Pro onto a baby stand. ...

Camera Mounting Options The Dev Dolly Pro includes: a 7.5”camera riser, a 75mm bowl adapter and a 100mm bowl adapter. The bowl adapters can be used directly on the sled or on the camera riser. To mount a bowl adapter onto the sled or the riser:  remove the 3 screws  Swap the plate with ...