Gira System 3000 Operating Instructions Manual
Text of Gira System 3000 Operating Instructions Manual
Relay switching insert 2-gang
Relay switching insert 2-gang
Order no.: 5404 00
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect befor
Relay switching insert 2-gang
5
Operation with 1-gang push-button top
Switch load
With the 1-gang push-button top, output a2 switches depending on the switching state of output
a1.
■
Press push-button.
Output a1 and a2 switch on and off.
Extension unit operation
Operation using 2-wire extension, push-button or rotary dimmer extension correspond
Relay switching insert 2-gang
–
Press timer with display and the button ƞ and Ɵ simultaneously for longer than
4 seconds.
Run-on time
The run-on time for output a2 is set at the insert as described (see Setting the time function/run-
on time).
7
Operation with Bluetooth motion detector
During movement, the motion detector switches output a1 d
Relay switching insert 2-gang
Connecting and fitting the device
Figure 1: Connection diagram with optional extensions
(1)
Button TEST
(2)
Display LED and connection socket for cover
(3)
2-wire extension
(4)
3-wire extension/rotary dimmer extension
(5)
Push-button, NO contact
Figure 2: Clampable conductor cross-section
For protection, only the c
Relay switching insert 2-gang
The load at both outputs can be switched by briefly pressing the TEST button (1) (switch-
ing states: a1 on a2 off, a1 off a2 on, a1 and a2 on, a1 and a2 off).
Set time function/run-on time
■
Press the TEST button (1) for longer than 4 seconds.
LED (2) lights up in the colour of the set time, see table.
LED signal