Hamilton Beach 78402C Manual 

LIRE AVANT UTILISATION LEA ANTES DE USAR Visit www.hamiltonbeach.com for our complete line of products and Use and Care Guides – as well as delicious recipes, tips, and to register your product online. Rendez-vous sur www.hamiltonbeach.ca pour notre liste complète de produits et de nos manuels utilisateur – ainsi que nos délicieuses rec ...

injury to persons, including the following: 1. Read all instructions. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, o ...

Other Consumer Safety Information This appliance is intended for household use only. w WARNING Entanglement Hazard: To avoid serious injury, do not reach into grinder inlet. Always use food pusher. Do not operate without tray in place. w WARNING Electrical Shock Hazard: This appliance is provided with a polarized plug (one wide bl ...

*To order parts: US: 1.800.851.8900 www.hamiltonbeach.com Canada: 1.800.267.2826 Mexico: 01 800 71 16 100 Extruder Head Cover Extruder Head Controls Tray Food Pusher Auger Grinder Blade Medium Grinding Plate Coarse Grinding Plate Ring Nut Stuffing Funnel Head Locking Button Base Feed Chute Controls Grinder Head BEFORE FIRST USE: Wash all ...

Disconnect power before cleaning, disassembling, or assembling. 1. Unplug. 2. Remove the ring nut, grinding plate, grinder blade, and auger from the grinder head before installing the grinder head to the base. 3. Align notches on the grinder head with the tabs on the base. 4. Press the grinder head against t ...

Disconnect power before cleaning, disassembling or assembling. 1. Unplug. 2. Remove the ring nut, grinding plate, grinder blade, and auger from the grinder head before installing the grinder head to the base. 3. Align notches on the grinder head with the tabs on the base. 4. Press the grinder head against th ...

should be used for brief periods of time to help clear a jam. 1. Allow the grinder motor to come to a COMPLETE STOP before engaging in REV (reverse). 2. Push the REVERSE button; then press the REV switch. NOTE: NEVER operate the grinder in reverse for more than 5 seconds. 3. If the grinder remains jamme ...

removed COMPLETELY to prevent pushing meat back into the motor drive shaft housing. • To prevent overheating, do not operate the grinder for more than 15 minutes at a time. Allow the grinder to cool periodically. • DO NOT overtighten the front ring nut. It should be firmly tight. ...

is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of original purchase in Canada and one (1) year from the ...

d’incendie, d’électrocution et/ou de blessure corporelle, en particulier les mesures suivantes : 1. Lire toutes les instructions. 2. Cet appareil n’est pas destiné à être utilisé par d ...