Infinite Peripherals LINEA PRO 6 Quick Start Manual

ASSEMBLY Linea Pro® Pistol Grip Charging Station (1-Unit) for Linea Pro® 5 and Linea Pro® 6 Pistol Grips QUICK START GUIDE CHARGE STATUS TROUBLESHOOTING Cradle Charging Bay LED Indicator DC Jack Port Front View Back View 1. Place the charging station on a sturdy, clean and dry surface in an open, well- ventilated area away from direct sunlight. 2. Plug in the included DC barrel plug to the DC port on the front of the charger. Then connect the AC power adapter to a power outlet. 3. Insert the Pistol Grip into the charging bay so that the cradle supports the front of the Linea Pro sled, as shown in figures above. When the pistol grip is seated correctly, the LED on the front of the charger turns green indicating power is being supplied to the device. The Linea Pro Pistol Grip Charging Station (1- Unit) uses the following LEDs to indicate the charge status: STATUS INDICATOR LEDS Green Power is being supplied to the charger. No LED Indicates there is no device in charging bay or there is no power supply attached to the charger. For device charging status, please refer to the user documentation provided with your Linea Pro Pistol Grip for Linea Pro 5 and Linea Pro 6 devices. The LED does not come on when the Linea Pro Pistol Grip is inserted into the charging station, or the Linea Pro iOS device is not charging. • Ensure the DC barrel plug is securely inserted into the DC port on the front of the charging station and the AC power adapter is plugged into a working power outlet. • Ensure the unit is seated properly in the charging bay. It takes an excessive amount of time to fully charge the battery. • Verify ambient temperature meets the operating temperature requirements. Operating: 0°C to +30°C (+32°F to +86°F) Note: The Linea Pro Pistol Grip Charging Station is designed specifically to charge the Linea Pro 5 and 6 and iOS device. However, the iOS device must be properly installed in the Linea Pro for charging to occur.

for the Linea Pro Pistol Grip Charging Station (1-Unit). Please visit our website at ipcmobile. com, or contact your Infinite Peripherals account representative, for additional information about current and future product accessory offerings. ACCESSORIES Mobility Sales/Technical Center Infinite Peripherals, Inc. 17681 Mitchell N. Irvine, CA 92614 Toll-Free: (866) 278-7860 Office: (949) 222-0300 Headquarters/Main Warehouse Infinite Peripherals, Inc. 2312 Touhy Ave Elk Grove Village, IL 60004 Toll-Free: (800) 278-7860 Office: (847) 818-1260 Fax: (847) 818-1287 Technical Support Infinite Peripherals, Inc. 17681 Mitchell N. Irvine, CA 92614 Toll-Free: (866) 278-7860 Office: (949) 222-0300 Email [email protected] Website ipcmobile.com • Note: Box contents and part numbers may vary based on order configuration. iOS device and other additional items shown on this quick start guide may not be included. Infinite Peripherals does not warrant, and is not responsible for, any damage to the Linea Pro Pistol Grip Charging Station (1- Unit) (“Product”) as a result of liquid or solid particle intrusion into the Product or damage caused by dropping the Product. If a material or workmanship defect arises with regard to any Infinite Peripherals product, and a valid claim is received within the Warranty Period, Infinite Peripherals (at its sole discretion) will (1) repair the Product using new or refurbished parts or (2) replace the Product with a new or refurbished Product. For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies. QSG-10015 Rev D WARNINGS & CAUTIONS Please observe the following precautions: • Keep the charger away from liquids. Do not immerse the charger in water. • When not in use, store the charger in a cool dry place. • Do not store or operate the charger near a heat source. • The charger is information technology equipment and for office use only, and should only be used for its intended purpose. • Do not use any power adapter other than the one provided with this charger. The use of any other adapter may damage the charger and will void the warranty. • Device should only be repaired by Infinite Peripherals or an authorized service facility. ADDITIONAL INFORMATION Please contact your Infinite Peripherals sales representative for technical specifications and additional product documentation. WARRANTY PRODUCT RETURNS Use the link provided to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile and subscribe to Alerts. To Request a RMA: 1. Create a user account in the RMA Support Portal at https://ipcmobile.com/ support/rma/ 2. Login to your user account and click Create RMA Request. 3. Read the instructions provided and complete the online request form. 4. Note the assigned RMA number and write it clearly on your shipping carton. 5. Ship your equipment back to us at the address provided. Specifications subject to change without notice. Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are the property of their respective owners. CONTACT US