dji ROBOMASTER Operation & User’s Manual

(hereinafter referred to as “Battery Rack”). Carefully read this entire document and all safe and lawful practices provided by DJI TM before using this product for the first time. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you her ...

power a battery and can be fixed to surfaces such as the ground, a wall, or a robot. The Battery Rack is compatible with batteries such as the DJI TB47 and TB48 series. The power switch is used to power the battery on or off and the battery information port monitors data such as the current Magic Cable Tie × 1 Metal Fixing Plate × 1 Screws × 3 (M3×6) Battery Rack × 1 Magic Buckl ...

When used in environments prone to vibration or there is a risk of impact, it is recommended to fix the magic cable tie and buckle onto the Battery Rack before mounting the Battery Rack and battery. When attached to a static surface like a wall or the ground, there is no need to fix the magic battery level. The magic cable tie in the package helps to secure the battery and prevents it from fal ...

to fix the magic buckle to the opposite side of the power switch. cable tie and buckle. 1. Unscrew and remove the power switch. Compress the magic cable tie with a metal fixing plate and use screws to fix the power switch, metal fixing plate, and magic cable tie to the same side you removed the power switch (the power cables have not been included in the illustration below for easy viewing). ...

screws are required to mount the Battery Rack properly. The depth of the threaded holes is 6 mm. DO NOT use screws that are longer than this depth. Otherwise, the Battery Rack may be damaged. Mounting the Battery Rack Refer to the dimensions in the illustration below when mounting the Battery Rack. ...

After mounting the Battery Rack, insert a battery into the Battery Rack in the same direction as shown below in illustration 1 . Secure the magic cable tie as shown below in illustration 2 . Usage After mounting the Battery Rack and inserting a battery, power on the battery as follows: 1. Connect the power output port to a robot or the Referee System. 2. Press the battery power button once to check the battery level, and then press a ...

the battery. Specifications Weight: 85 g Power Output Port Connector: XT60 Max Operating Current (Continuous): 35 A ...

8 免责声明 感谢您购买 RoboMaster TM 电池架（兼容型）（以下简称 “电池架”）。使用本产品之前，请仔细阅读并遵循本文 及大疆 TM 创新（DJI TM）提供的所有安全指引，否则可能会 给您和周围的人带来伤害，损坏本产品或其它周围物品。一 旦使用本产品，即视为您已经仔细阅读本文档，理解、认可 和接受本文档及本产品所有相关文档的全部条款� ...

3. 电池信息接口 可用于监测当前电池电量等 数据。 4. 电源输出口 可连接至机器人或裁判系统。 简 介 RoboMaster 电池架（兼容型）是一款专为 RoboMaster 机器 人设计的电池固定和供电器件。其安装方式灵活，可分别选 择使用对应两侧进行固定。该款电池架兼容 DJI TB47 系列和 ...

10 安 装 安装魔术扎带和扣带（可选） 当于震动、冲击等环境下使用时，建议用户将该魔术扎带和 扣带安装于电池架上，然后再安装电池架和电池。当静态使 用电池架时，则无需安装魔术扎带和扣带。 1. 松开电源开关模块侧螺丝，将整个电源开关模块取下。使 用金属固定片压住魔术扣带，然后使用螺丝将电源开关模 块、金属固定片以及魔术扣� ...

11 俯视图 正视图 侧视图 单位： mm 55.40 103.50 37.50 22 75 4×M3 45 22 4×M3 电池架上的螺纹孔为 M3，请选择至少三颗合适的螺 丝安装电池架。 螺纹深度为 6mm，请勿使用过长的螺丝，否则可能会 导致电池架损坏。 安装电池架 请参考电池架的尺寸将其安装至相应位置。 ...

入电池架，然后再将魔术扎带绑好，如图示 2 。 使 用 安装完毕电池架并插入电池后，请按照如下步骤接通电池 电源： 1. 将电源输出口插入机器人或裁判系统； 2. 先短按电池上方的电源开关一次检查电量，再长按以开启 电池电源； 3. 将电池架上方的电源开关按到打开位置，� ...

电源输出口接头：XT60 最大持续工作电流：35 A 部件名称 有害物质 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr +6) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 线路板 × ○ ○ ○ ○ ○ 外壳 × ○ ○ ○ ○ ○ 金属部件（铜合金） × ○ ○ ○ ○ ○ 内部线材 × ○ ○ ○ ○ ○ 其他配件 × ○ ○ ○ ○ ○ 本表格依据 SJ/T 11364 的规定编制。 ○：表示该有害物质� ...

YC.BZ.S01414.05 和 是大疆创新的商标。 Copyright © 2020 大疆创新 版权所有 WWW.ROBOMASTER.COM and are the trademarks of DJI. Copyright © 2020 DJI All Rights Reserved. ...