IME-DC iDia Operation & User’s Manual

Text of the manual

TABLE OF CONTENTS

3 TABLE OF CONTENTS INTRODUCTION...........................................................................5 DESCRIPTION OF SYSTEM COMPONENTS.....................................7 ■■User interface ■■Light button and data port ■■Battery compartment ■■Test strip CONFIGURATION.................................................

TABLE OF CONTENTS

4 5 INTRODUCTION Thank you for your trust! You have chosen the iDia blood glucose monitoring system, which can be used together with iDia test strips and related accessories to easily and conveniently measure your blood glucose levels. The measurement range of the iDia blood glucose monitoring sys- tem is between 10 – 600 mg/dL or 0.6 –

Before taking your first measurement, please take note of the

following important information. ■■The iDia blood glucose monitoring system is an in vitro diagnos- tic tool that is suitable for self-testing. It enables people with diabetes and specialist medical staff to determine blood glucose values. ■■The iDia blood glucose monitor

Pressing the light button when the blood glucose monitoring

system is switched on will activate the display's blue background lighting. This makes it possible to take and read measurements correctly even in low light conditions. Battery Battery Set button DESCRIPTION OF SYSTEM COMPONENTS DESCRIPTION OF SYSTEM COMPONENTS LIGHT BUTTO

Touch the drop of blood with the appli-

cation area. The blood will be absorbed automatically. Measurement contacts Insert the test strip into the test strip slot, with the measurement contacts first. Test area This area must be completely filled with the blood sample. MEASUREMENT FIELD NOTE You can touch the

DATE AND TIME

NOTE The figures needing adjustment flash on and off (shown in white in the illustrations). 1 Set button pressed once: The blood glucose meter switches itself on. ‘Year’ setting 2 Set button pressed second time: ‘Month’ setting 3 Set button pressed third time: ‘Day’ setting 4 Set button pressed fourth time: ‘Hour’ setting

meter switches itself off (after pressing the set button for the last

time). Your changes will only be saved after this step. Your iDia blood glucose monitoring system can issue an alarm tone five times a day to remind you to check your blood glucose level. After pressing the set button six times (see page 13) you can set fi

‘INSERT TEST STRIP’ NOTIFICATION

16 After the iDia blood glucose monitoring system has been switched on with the main button, the test strip symbol will appear in the display. You should now insert the test strip into the device’s test strip slot. Correct insertion of the test strip will be confirmed by an audio signal. BLOOD SAMPLING NOTIFICATIO

Other Blood Glucose Meter Manuals