Lantech LSC-1102B Operation & User’s Manual

1. Introduction ……………………………………………… 3 Overview ……………………………………………………… 4 Product Specifications ………………………………………… 8 2. Description & Installation ……………………………… 10 Product Panel Views …………………………………………… 10 LED Indicators ………………………………………………� ...

RS-232 port and other one is a 422/ 485 (Auto-Detective) and it provides one socket connection port. Lantech provides new ways of connecting legacy serial devices to a Local Area Network (LAN) or Wide Area Network (WAN). TCP/IP serial devices are designed to operate serial ports over 100Mbit/s Ethernet networks. The data is transmitted via TCP/IP protocol. The ...

Speed 300 bps ~ 230.4 Kbps Parity None , Odd , Even , Mark , Space Data Bit 5 , 6 , 7 , 8 Stop Bit 1 , 2 Port-1 RS-232 Pins : Rx , Tx , GND , RTS , CTS , DTR , DSR , DCD Port-2 (RS-422) Rx+ , Rx- , Tx+ , Tx- ( Surge Protect ) Port-2 (RS-485) Data+ , Data- ( Surge Protect ) Resistor Built–in RS-422 / RS-485 pull high / low Resistor ESD 15KV ESD for al ...

Product Panel Views Serial I/O Port of RS-232 and RS-422/485 Connect the serial data cable between the converter device and the serial devices. Follow the parameter setup procedures to configure the converter (see the following chapters ). Digital I/O Transforming the sensor which connecting on the Lantech TCP/IP converters equipment statuses into the TCP/IP package data and send out by the Ethernet DataStream ( The ...

converters and the RS-485/RS-422 device. Follow the parameter setup procedures to configure the converter (see the following chapters). Power Supply LSC-1102B TCP/IP converter device is powered by a single 9Vdc (inner positive/outer negative) power supply and 500mA of current. A suitable power supply adapter is part of the packaging. Connect the power line to the power jack at the ...

Tx (Green): Data sent indicator (When data are sending to the network, the LED will blink.) Rx (Red): Data received indicator (When data are receiving to the network, the LED will blink.) SYS (Green): It is a device statues indicator (When Lantech TCP/IP converter is operated in normal statues, the LED will blink once per second.) ...

RS-422/RS-485 Wiring Architecture LSC-1102B LSC-1102B LSC-1102B LSC-1102B LSC-1102B ...

converter is installed correctly. You can use the Setup Tool “CVBrowser.exe” to setup the IP Address. To proceed the advanced parameter setup, please use a web browser (IE or Netscape) to continue the detailed settings. ...

2. Execute CVBrowser.EXE. ...

2. Power on LSC-1102B 3. Click scope icon of CVBrowser to search the LSC-1102B(Default IP 192.168.0.100) 4. Make sure the IP of your desktop and LSC-1102B are in the same domain (192.168.0.x) ...

5-1.Hoover your mouse to the icon of LSC-1102B 5-2.click the icon and it will be highlight by blue color ...

6. Press WEB Browser 7. Log in LSC-1102B via web browser. ...

If by chance, you forget the setup password, or have incorrect settings making the converter inoperable, there are two ways to reset the setting and the following procedures can be used to reset all settings to factory default: A: 1. you can turn off the power and then use any point tip to push “Reset” button and hold it to turn on the power at the same time for 5 seconds. The password will be reset to the factory default as “ ...

correct. This chapter will introduce how to use a single computer to test if the converter behaves well. The operating system can be Windows 95, 98, ME, XP, 2000. The “Hyper Terminal” utility should be installed on your PC (see Figure 6.1). It can be found in your Windows installation CD. The wiring architecture is similar to “RS-232 Wirin ...

Initiate a Hyper Terminal from the Start Menu in Windows (see Figure 6.1), give a terminal name, choose an icon, and press “OK” button (see Figure 6.2). (Figure 6.1) ...

...