Inter-m PU-103 Operation Manual

Welcome Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory s ...

1 PU-103/106/112 Contents Contents Unpacking .......................................................................................................................................2 Installation Environment.......................................................................................................................... ...

2 PU-103/106/112 Installation Unpacking Unpacking Although your PU-103/106/112 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, ...

3 PU-103/106/112 Features Features - COMPACT DESIGN Easy to install and operate with compact design of 1U size and functions. - DIGITAL AMPLIFIER CIRCUIT Take up the Digital Amplifier Circuit with High efficiency of the rated power PU-103: 30W, PU-106: 60W, PU- 112: 120W), High reliability, low weight and low temperature. - US ...

4 PU-103/106/112 Contents and Accessories Contents and Accessories 1. 8P Terminal Block x 1EA 2. Operation Manual x 1EA Operation Operation 1. Before you plug the power cord to AC outlet, please set the power switch OFF, tone Control center, and volume level minimum. 2. Please make sure the speakers and input jacks are properl ...

5 PU-103/106/112 Front Panel Front Panel 1. USB-A (MEMORY) SLOT Please use your own with adjustment the volume using each input volume and master volume, the tone using the tone control. ※ File system: FAT16, FAT32 (NTFS not available) ※ Formats supports only 1) MP3 files: *.mp3, *.mp2, *.mp1 2) WMA files: *.asf, *.wma 3) ...

6 PU-103/106/112 3. INPUT SIGNAL LED These green LEDs flash when signal is present and the input level control to INPUT 1~3 is turned up. 4. INPUT VOLUME These adjust the Mixing level of input signal of INPUT 1~3. ※ You can adjust the volume of USB and AUX input through INPUT 3 volume. 5. TONE CONTROL These controls the BASS ...

7 PU-103/106/112 Rear Panel Rear Panel 1. INPUT 1 TERMINAL This terminal is for microphones. Be sure to use a balanced cable. 2. SELECT SWITCH OF INPUT 1 PHANTOM MIC This is the switch to select types of microphones. Be able to use either dynamic microphone or condenser microphone, and the phantom power of +15V is supplied whe ...

8 PU-103/106/112 - 6.3ø Phone Jack 5. INPUT 2 LEVEL SELECT SWITCH This is the switch to adjust level of INPUT 2 - MIC: for microphones - AUX: for source devices 6. INPUT 3 TERMINAL AUX input terminal for such devices as microphone, PC, CD player, and DVD player. Please refer to the following picture about the suitable cables. ...