K-Mate BTH008 Operation & User’s Manual

User Manual
Brief introduction………………………………………….1 1. Bluetooth wireless communication technology………………..…..1 2. About BTH008…………………………………………………..…..1
Before use………………………………………….……….2 1. Overview……� ...

carefully before use.
Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest t ...

1. Overview 2. Charging the battery of BTH008 First use—You must charge the battery of BTH008 fully before first use. Low power—When the red LED flashes and you hear 3 “Dong” tones every 20 seconds, the BTH008’s battery is low power and needs to be recharged. The charging steps are as follows: Step1: Connect charger or charging cabl ...

1. Switching on/off BTH008 Function Operation LED indicator Indication tone Switching on BTH008 Press and hold MFB button for 5 7 seconds Blue LED is on steadily for 1 second A long tone Switching off BTH008 Press and hold MFB button for
 seconds Red LED is on steadily for 1 second A long tone Remark: In order to save power, BTH008 wi ...

automatically. If you want to pair it with other devices, please switch off the Bluetooth function of the current Bluetooth device first and then pair BTH008 with the new device according to steps 1 6 mentioned above. 3. Re-connecting BTH008 with a Bluetooth device 1) Automatic co ...

One tone Transfer call Conversation mode Press and hold MFB button for 2 seconds and release it when hearing indication tone One tone Microphone mute Conversation mode Short press MFB button twice quickly. When the microphone is muted you will hear two tones every 5 seconds One tone Cancel mute Conversation m ...

tone.  To remotely control the last song/next song/pause/play function, your audio source needs to support AVRCP. Please refer to your cell phone’s or your Bluetooth transmitter’s user manual for further information. 7. LED indicator 1) When charging BTH008 LED indicato ...

In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.
FAQ 1 Why does the red LED flash twice every 20 seconds ? Because the battery is low power, it needs to be recharged. 2 Why doesn’t the red LED light up while charging? a) Plea ...

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party re ...