laerdal SimJunior Directions For Use Manual

Introduction 2 Standard System 8 – Introduction to SimJunior Standard 8 – Setup Summary 8 Advanced System 9 – Introduction to SimJunior Advanced 9 – Setup Summary 9 – Instructor Software License 10 – Instructor PC 10 – Instructor PC Application Screen Overview 10 – Running a Scenario 12 – Patient Monitor 12 – Patient Monitor Interface 12 – Importing and Adding Media Files 13 – The Laerdal Debrief Vi ...

SimJunior is a realistic, life-size pediatric patient simulator designed to be used for the education of individuals or teams of healthcare professionals multiple medical disciplines. The SimJunior Simulator comes completely assembled. There is no need to assemble parts of the manikin. For details on preparing SimJunior for simulation, go to “Manikin Setup” section. SimJunior Help Directions for Use (D ...

Follow the instructions below to maintain optimum performance and longevity of the manikin and its components. General Care To maintain manikin skins, wash hands before use and place the manikin on a clean surface. Laerdal recommends to: – Use gloves during simulation scenarios. d e r olo c g nis u di ...

defibrillation sequence of 3 shocks in 45 seconds followed by 1 minute of CPR. After 30 minutes, cease all shocking for at least 15 minutes before starting a new sequence. Do not repeat this for more than a 4 hour period. Also, do not provide more than 2 x 300 defibrillator discharges per minute. Warnings: – The manikin must not come into contact with electrically conduc ...

Connector Right Leg ECG Connector Left Arm ECG Connector Left Leg ECG Connector Power Cable 37 Pin Serial Cable (Manikin to Manikin Cable Adapter) External Air Connection IO Leg IO Leg Fill Port Blood Pressure Arm Sternum Defib Plate IV Arm Apex Defib Plate SimJunior Simulator ...

to clinical intervention, instructor control, and pre-programmed .tn eita p a fo tn e m ta e rt d n a sis o n g aid fo e citc ar p e vitc effe r of s oira n e cs With spontaneous breathing, airway control, voice, sounds, ECG, and .r o talu m is cirtaid e p la n oitc n uf ylluf a si r oin uJ m iS ,s e r uta ef la cinilc r e ht o SimJunior allow ...

− Heart sounds - anterior location (1). − ECG rhythm monitoring (4-connector, 3-lead ECG). − 12-lead ECG display (SimJunior Advanced only). − Pacing. − Defibrillation and cardioversion using live defibrillators. Defibrillation: − The numbe ...

1. Connect the SimPad to the Link Box – Connect the Link Box to power supply or battery. Connect the Manikin to the Link Box – Connect the 37-Pin Serial Cable (Adapter Cable may be required) to the Link Box. – Place the Blood Pressure cuff on the left arm of the manikin if desired. – Connect the clear tubing from the Blood Pressure cuff to the SimPad B ...

SimJunior Advanced includes – Manikin and soft carrying case – SimJunior Quick Setup Guide – SimPad Link Box and Accessories – Operating Software for the SimPad System – Instructor Laptop PC – Touchscreen Patient Monitor (Complete Peripheral Kit Only) – USB Webcam – USB Hub – Blood Pressure Cuff – Set of Consumables – Operating Software for the Instructor PC – SimJunio ...

– Double-click on the Elo logo in the system tray in the lower right corner of the screen. – Click the button on the dialog box that appears. – If target indicators first appear on the Instructor PC screen, press , or wait until they appear on the Patient Monitor. – When the target indicator appears on the Patient Monitor, touch each target as it changes posi ...

1. Program Menu Bar – Open and edit file. – Set up and configure the patient monitor and the simulator. – Access additional application such as the Scenario Editor. 2. Respiration and Seizure Control – Adjust the simulator’s respiratory rate. – Start and stop different types of seizures. 3. Simulator Sounds, Airway, and Circulation – View and set body sounds for lungs, heart, stomach, a ...

– View and control shocks to conversion and pacing threshold. Click the Running rhythm button to exchange the running rhythm and waiting rhythm. Click the Extrasystole button to insert an extra systole into the running rhythm. 5. Instructor Monitor Control – View status of patient’s vital signs throughout the simulation. The patient monitor waveforms and parameters can be set directly by s ...

The learner may also edit scaling, alarm limits, etc. using this interface. Clicking the parameter of interest will present a menu with available options. Some fields will only be available while appropriate sensors are connected to the Manikin. 3. Bottom menus There are two bottom menus. Press the left or right arrow key to toggle back and forth between Bottom Menu 1 and Bottom Menu 2. Bottom Menu 1 (in o ...

2. Click on the appropriate Radiology, Media, or Labs button. 3. Click in the dialog box. 4. The system will then notify the Instructor of the order via the Instructor Application. The learner may also click on any of the relevant menus to check if the Instructor has made any media files available for viewing. Laerdal Debrief Viewer The Debrief Viewer is a debriefing tool that allows you to open a ...

If you are using an external compressor, turn off the internal compressor by unchecking the box next to the Changing Settings During Simulation The Internal Compressor, Tongue Edema, and Seizure can be adjusted during the simulation by accessing the SimJunior Dialog Menu. Any changes made in this window will not eff ...

After the SimJunior manikin is prepared and all applicable interactive units (SimPad or Instructor PC and Patient Monitor) are configured and made ready for use, final preparations may need to be performed before SimJunior is ready to run simulations. Final simulation preparations include the following activities: • Changing Settings for the Internal Compressor • Connecting an External Compressor • Prepari ...

The IV fluid system is an open system. IV fluids are drained as they are administered. Before each session: 1. Attach the IV overflow tube (in the manikin’s right arm) to an overflow container (such as an IV bag). 2. Allow excess fluid to drain into a container during the simulation.. Cleaning the IV Arm Clean the IV arm after each session or day of use by flushing the IV Arm with 60% isopropanol or 70% eth ...

.s e y e e ht ni d ellats ni slip u p la m r o n hti w d e r e vile d si r oin uJ m iS A separate kit containing plastic pupil inserts (constricted and dilated) comes with SimJunior. To change the pupils: 1. Carefully open the eyelids wide, taking care not to tear the manikin face skin. 2. Using the suction cup tool provided in the kit or with the edge of your fingernail, carefully remove the pupil from the e ...